Dupont TY125SHVMD0025XC Coveralls Medium Tyvek 25 Pack

Product Description

The DUPONT TY125SHVMD0025XC is a disposable Tyvek 500 HV coverall designed for particle protection and anti-static applications in industrial and trade environments. Built from 1.2 oz Tyvek 500 HV fabric, the garment is fluorescent orange with silver-grey retroreflective bands that support both daytime and nighttime visibility. The mandarin collar, elasticated wrists, elasticated ankles, and serged seam construction provide a close, protective fit while remaining lightweight enough for extended wear. This coverall is sized Medium with a 31.87-inch inseam and ships in a package quantity of 25 units. Licensed contractors, industrial hygienists, and trade technicians working in particle-sensitive or low-hazard environments are the primary installers and end users.

This coverall is suited for residential and commercial job sites where particle protection and high-visibility requirements apply. Typical applications include asbestos abatement staging, insulation work, HVAC duct cleaning, and general construction tasks where a non-hazardous-rated disposable barrier garment is required. The fluorescent orange coloration with retroreflective banding makes it appropriate for work in areas with vehicle or equipment traffic. It is classified at the ISO Non-Cleanroom level, meaning it is not intended for controlled cleanroom environments. The zipper front closure allows for quick donning and doffing in the field.

Key Features

• Tyvek 500 HV fabric at 1.2 oz material weight — robust yet lightweight particle barrier
• Fluorescent orange with silver-grey retroreflective bands for day and night visibility
• Elastic wrists and elastic ankles for a secure, sealed fit at extremities
• Serged seam construction for durability across the garment body
• Zipper front closure for fast, reliable donning and doffing
• Anti-static and particle protection rated per EN 1149-1 and related standards
• Package quantity of 25 units per order

Compatibility

Designed as an OEM-style disposable coverall for non-hazardous particle protection applications in industrial, construction, and trade service environments at Medium sizing.

Installation Notes

Coveralls should be donned before entering the work area and removed carefully at the egress point to avoid re-contamination. Power down or de-energize any nearby electrical equipment when working in confined spaces where static discharge is a concern, given the anti-static rating of this garment. Disposal must follow applicable local, state, and federal regulations for the waste type encountered on the job site. No tools are required for donning, but a second person may assist with inspection of seam integrity prior to entry into the work area.