Dupont TF169TGY4X0006TV Tychem 6000 Coveralls 4XL

Product Description

The DUPONT TF169TGY4X0006TV is a disposable full-body coverall constructed from Tychem 6000, a proprietary barrier film laminated to a Tyvek substrate. The garment is rated for protection against over 180 challenge chemicals, including chemical warfare agents and toxic industrial chemicals, with a minimum of 30 minutes of barrier protection per the manufacturer specification. It features a front zipper closure with storm flap, elastic cuffs, an attached sock ankle, and fully taped seams for added integrity. This coverall is intended for use by hazmat responders, industrial hygienists, emergency response personnel, and trained technicians working in chemically hazardous environments.

This coverall is suited for high-risk industrial and emergency response applications where chemical splash, bloodborne pathogen exposure, abrasion, and flame hazards are present. The 4X-Large sizing and 30.5-inch inseam accommodate a wide range of body types. The gray coloring and non-cleanroom ISO classification make this garment appropriate for field use rather than controlled manufacturing environments. Each package contains 6 coveralls with a minimum order quantity of 1 package.

Key Features

• Tychem 6000 barrier film laminated to Tyvek substrate provides broad-spectrum chemical resistance
• At least 30 minutes of protection against over 180 challenge chemicals including chemical warfare agents and toxic industrial chemicals
• Fully taped seams reduce potential penetration points at stitch lines
• Storm flap over front zipper closure adds secondary barrier layer
• Attached sock ankles and elastic cuffs provide secure fit at extremities
• Meets ASTM F1670 and ASTM F1671 standards for bloodborne pathogen resistance

Compatibility

Designed as an OEM-style disposable protective coverall for use in hazmat, chemical handling, emergency response, and industrial safety applications requiring Tychem 6000-level protection.

Installation Notes

Donning and doffing of chemical protective garments should be performed by trained personnel following site-specific hazmat protocols and applicable OSHA regulations. A trained buddy or doffing assistant is recommended to minimize contamination during removal. Inspect each garment for defects before use and discard immediately if any tears, punctures, or seal failures are found. Dispose of used garments per applicable local, state, and federal regulations governing chemically contaminated PPE.