Dupont SL127BWHLG001200 Disposable Coveralls Large

Product Description

The DUPONT SL127BWHLG001200 is a disposable full-body coverall constructed from Tychem 4000 film laminate fabric, weighing 3.6 oz per square yard at 12.00 mil thickness. Designed for single-use applications where chemical splash, particulate, and contamination exposure are primary hazards, this coverall provides a barrier layer for workers in demanding environments. An attached hood with elastic face opening, elastic cuffs, and elastic ankles create a secure fit that limits exposure points. A front zipper closure is covered by a storm flap that can be sealed with an adhesive strip to reduce infiltration. Licensed HVAC, remediation, and hazmat technicians, as well as emergency medical responders, are the primary installers and users.

This coverall is sized Large with a 27.5-inch inseam and is suited for chemical mixing operations, hazardous materials remediation, emergency medical response, paint spraying applications, and nuclear environments. The bias bound seam construction reinforces each seam with a garment fabric cover strip, reducing particle penetration risk and improving seam durability. Its ISO Non-Cleanroom classification makes it appropriate for general industrial and field use rather than controlled cleanroom environments. Each package contains 12 coveralls with a minimum order quantity of 1 package.

Key Features

• Tychem 4000 film laminate fabric at 3.6 oz weight and 12.00 mil thickness for chemical and particulate protection
• Attached hood with elastic face opening for full head and neck coverage
• Storm flap over front zipper with adhesive strip seal to minimize infiltration at closure
• Bias bound seams reinforce stitch lines and reduce particle penetration potential
• Elastic cuffs and elastic ankles provide a fitted seal at wrist and ankle openings
• Meets ASTM D1777, ASTM D3776, ASTM D3786, ASTM D5034, and OSHA 16 CFR 1610 standards

Compatibility

Designed for use in chemical mixing, hazardous remediation, emergency medical response, paint spraying, and nuclear environments where disposable full-body barrier protection is required. ISO Non-Cleanroom class rating applies.

Installation Notes

Donning should follow site-specific PPE protocols; inspect the coverall for packaging damage before use and discard any unit with visible tears or compromised seams. Power down or de-energize equipment in the work area as required by site safety plans before suiting up. Disposal must comply with applicable local, state, and federal regulations governing the waste stream generated by the work task. These coveralls are single-use only and must not be laundered or reused.