Dupont RC128TTN2X000100 Coverall 2XL Tan Chemical-resistant

Product Description

The DUPONT RC128TTN2X000100 is a non-disposable, chemical-resistant coverall designed for hazmat and industrial protection applications. Built in a 2X-Large size and finished in tan, this full-body garment features a hook-and-loop front closure with a storm flap for added chemical ingress resistance and elastic cuffs that help seal the wrist opening against contaminants. It is intended for repeated use in environments where workers face exposure to hazardous chemicals, industrial liquids, or splash hazards. Safety managers, industrial hygienists, and trained hazmat personnel are the typical end users specifying and issuing this type of coverall.

This coverall is suited for industrial facilities, chemical processing plants, remediation sites, and similar commercial or municipal environments where splash and particulate protection is required. The elastic cuff design integrates with gloves to reduce gap exposure at the wrist. The storm flap over the front closure adds a secondary barrier at the zipper line, a common requirement in chemical handling protocols. This garment is classified as non-cleanroom and non-hazardous protection level per its product attributes, making it appropriate for general chemical splash and hazard environments rather than highest-tier CBRN response.

Key Features

• Non-disposable construction for repeated use and reduced per-use cost in ongoing operations
• Hook-and-loop front closure with storm flap for secondary barrier at the entry seam
• Elastic cuff style aids in sealing wrist interface with chemical-resistant gloves
• Full coverall garment style provides whole-body coverage in a single piece
• Tan color finish for easy visual inspection of contamination or soiling
• 2X-Large sizing accommodates a range of worker builds with room for layering

Compatibility

Designed as an OEM-style replacement or direct-issue chemical-resistant coverall for hazmat and industrial protection programs requiring a non-disposable, full-body garment in 2X-Large sizing.

Installation Notes

Donning and doffing of chemical-resistant coveralls should follow a site-specific hazmat protocol established by a qualified safety officer. Power down or isolate any chemical or process hazard before removing contaminated PPE. Inspect the garment for tears, compromised seams, or degraded closures before each use. Decontamination procedures must be performed according to applicable OSHA and site safety plan requirements before the coverall is removed or stored.