Dupont QS127TGR6X000400 Coveralls 6XL Tychem 2000 Sfr

Product Description

The DUPONT QS127TGR6X000400 is a size 6X-Large disposable coverall constructed from Tychem 2000 SFR, a lightweight barrier fabric weighing 3.2 oz per square yard. The garment delivers combined chemical splash resistance and secondary flame protection, making it appropriate for hazmat response, industrial maintenance, and emergency operations where flash fire exposure is a secondary risk. Seams are fully taped to reduce penetration at stitch lines. Elastic cuffs and elastic ankles provide a secure fit at the wrist and leg openings. A front zipper closure with stormflap keeps the entry point sealed during use. This coverall is intended to be worn over a primary flame-resistant garment, not as a standalone FR layer.

This coverall is suited for industrial, chemical processing, and hazmat environments where workers face simultaneous exposure to chemical splashes, particulates, and secondary flash fire risk. The ISO Non-Cleanroom classification means it is appropriate for general industrial use rather than controlled-environment applications. With a 35-inch inseam and a size 6X-Large cut, it accommodates larger build workers who require full-coverage protection without restricting movement. Installation is performed by the end user donning the garment on-site prior to entering the hazard area. Zero pockets reduce the risk of chemical accumulation or contamination carry-out.

Key Features

• Tychem 2000 SFR fabric provides chemical splash and secondary flame resistance in a single lightweight garment at 3.2 oz fabric weight
• Taped seams reduce seam penetration by chemical splashes and fine particulates
• Elastic cuffs and elastic ankles seal the garment at wrist and ankle openings
• Front zipper with stormflap closure keeps the entry point protected
• Size 6X-Large with 35-inch inseam for extended coverage on larger-frame workers
• Disposable construction eliminates decontamination and laundering requirements after use

Compatibility

Designed as an over-garment to be worn in combination with primary flame-resistant clothing in environments requiring chemical splash, particle, bloodborne pathogen, and secondary flame protection per the listed ASTM and OSHA standards.

Installation Notes

This garment is donned by qualified safety personnel or the end user following site-specific PPE donning and doffing procedures. Before entering a hazard area, inspect the coverall for any tears, open seams, or zipper damage and discard if compromised. Follow OSHA and site safety officer guidance on layering with primary FR garments. After use in a chemical or bloodborne pathogen environment, treat as potentially contaminated waste and dispose of per applicable local, state, and federal regulations.