Drill Rod Tool Steels 06308209 A2 Tool Steel Flat Stock

Product Description

The DRILL ROD TOOL STEELS 06308209 is an A2 air-hardening tool steel flat stock bar used in toolmaking, die work, and precision machining applications. Measuring 0.125 inches thick, 2 inches wide, and 18 inches long, this flat stock is ground to close tolerances, making it suitable for applications where dimensional consistency is critical. A2 tool steel is an air-hardening, cold-work alloy known for its good balance of hardness, toughness, and dimensional stability during heat treatment. Machinists, toolmakers, and die makers rely on this material for punches, dies, fixtures, and gauges.

This flat stock is appropriate for job shops, tool and die operations, and maintenance machining environments where A2 grade material is specified. The 18-inch length and 2-inch width make it a practical starting blank for a range of tooling components. It ships in a single-piece quantity and is suitable for both prototype and production tool fabrication. The pre-ground flat format reduces setup time compared to bar stock that requires additional surface preparation.

Key Features

• A2 air-hardening cold-work tool steel per AISI material specification
• Thickness of 0.125 inches with a tolerance of +0.010 to +0.015 inches
• Width of 2 inches with a tolerance of +0.010 to +0.015 inches
• Length of 18 inches with a length tolerance of +0.062 inches
• Square tolerance of +/- 0.003 inches for consistent flatness and squareness
• Pre-ground flat stock format ready for layout and machining operations

Compatibility

Designed as a standard A2 air-hardening tool steel flat stock suitable for general toolmaking, die making, and precision machining applications where AISI A2 material is required.

Installation Notes

Cutting and machining of tool steel flat stock should be performed by experienced machinists using appropriate tooling rated for hard or semi-hard steel. Heat treatment of A2 tool steel, including hardening and tempering, should follow the material manufacturer's published heat treat data and be performed by qualified personnel. Always wear appropriate personal protective equipment when cutting, grinding, or machining steel stock. Secure the workpiece properly before any machining operation to prevent movement.