Drill Rod Tool Steels 02630796 A2 Flat Stock 5/64x1/2x36 in

Product Description

The DRILL ROD TOOL STEELS 02630796 is an A2 air-hardening tool steel flat stock bar cut to a nominal 5/64 inches thick by 1/2 inches wide by 36 inches long. A2 tool steel is an air-hardening, cold-work die steel known for its excellent dimensional stability during heat treatment and good wear resistance. This flat stock is precision-ground to tight tolerances, making it suited for toolmakers, machinists, and die makers who need reliable raw material for punches, dies, gauges, and cutting tools. At 0.4 pounds per piece, it is easy to handle on the bench or at the machine.

A2 air-hardening flat stock in this size range is commonly used in tool and die shops, maintenance departments, and precision machine shops. It is well suited for fabricating small form dies, blanking punches, scribers, and custom cutting tools where dimensional accuracy before and after hardening is critical. This 36-inch length provides enough stock for multiple parts from a single piece, reducing setup time and material waste.

Key Features

• A2 air-hardening tool steel for excellent dimensional stability during hardening
• Precision ground to thickness tolerance of plus or minus 0.001 inches
• Width tolerance of plus 0.000 to plus 0.005 inches for consistent fitment
• Length tolerance of plus or minus 0.250 to 0.500 inches
• Square tolerance of plus or minus 0.003 inches
• Full 36-inch bar length allows multiple parts per piece

Compatibility

Designed as a standard A2 tool steel flat stock bar suitable for tool and die fabrication, punch and die sets, gauges, and general cold-work tooling applications requiring an air-hardening grade.

Installation Notes

Cutting and machining of tool steel flat stock should be performed by qualified machinists or toolmakers using appropriate metalworking equipment. When heat treating to harden, follow the A2 material specification guidelines for austenitizing temperature and air-quench procedures. Always allow the steel to reach ambient temperature before measuring final dimensions to verify tolerances. Use appropriate personal protective equipment when cutting, grinding, or heat treating tool steel.