Draper 101638 94 Inch 16:10 Motorized Projection Screen

Product Description

The DRAPER 101638 is a motorized commercial projection screen designed for professional AV installations in conference rooms, auditoriums, classrooms, and large presentation spaces. This is the Premier series model in a 94-inch diagonal format with a 16:10 aspect ratio and a Matt White surface, which provides wide viewing angles and even light diffusion across the image field. The screen operates on a 110-volt motor drive, allowing smooth, reliable electric raising and lowering. It is sold as a single unit and is intended for installation by qualified AV technicians or commercial electricians.

The 101638 is suited to commercial environments where a fixed motorized screen is preferred over a portable or manual pull-down solution. The 16:10 aspect ratio aligns with standard widescreen computer and presentation formats, making it a practical choice for corporate boardrooms, lecture halls, and training facilities. The Matt White surface is compatible with standard and short-throw projectors operating in moderate ambient light conditions. This screen is part of the DRAPER Premier line, which is built to commercial-grade standards for durability and consistent performance in high-use settings.

Key Features

• 94-inch diagonal viewing surface in 16:10 widescreen aspect ratio
• Matt White screen material for wide viewing angles and uniform diffusion
• 110-volt motorized operation for smooth electric raise and lower
• Commercial-grade construction suited for high-use professional environments
• Single-unit configuration for straightforward procurement and installation

Compatibility

Designed as a commercial motorized projection screen for use with standard and short-throw projectors in professional AV systems requiring a 16:10 aspect ratio format.

Installation Notes

Installation of motorized projection screens should be performed by a licensed electrician or certified AV integrator familiar with low-voltage control wiring and 110-volt branch circuit requirements per NEC guidelines. Power should be disconnected at the breaker before any wiring work is performed. The mounting structure must be rated to support the weight of the screen assembly, and ceiling or wall anchors should be appropriate for the substrate. Follow the manufacturer installation instructions for motor wiring and control interface connections.