Diversitech A65I Brass Compression Elbow 5/8 Inch Od

Product Description

The DIVERSITECH A65I is a brass compression elbow fitting designed to make a right-angle direction change in compression tubing runs. Built from brass, the fitting accepts tubing with a 5/8-inch outside diameter and uses a compression-style connection that does not require soldering or flaring. It is well suited for HVAC, refrigeration, and plumbing applications where rigid or semi-rigid tubing must be routed around obstructions without bending or kinking the tube itself. Licensed HVAC technicians and plumbers are the primary installers of this fitting type.

This fitting is used in residential and light commercial installations where tubing changes direction within a confined space, such as in equipment rooms, utility chases, or along wall runs. It eliminates the need to hand-bend tubing, which reduces the risk of kinking and flow restriction. Technicians should verify that the tubing outside diameter measures exactly 5/8 inch before installation and confirm that elbow orientation is correct before making final compression connections.

Key Features

• Right-angle elbow configuration for 90-degree direction changes in tubing runs
• 5/8-inch outside diameter compression connection — no soldering or flaring required
• Brass construction provides corrosion resistance and durability in wet or refrigerant-adjacent environments
• Eliminates tube bending, reducing risk of kinks and flow restrictions
• Compression-style joint allows for field assembly with standard hand tools

Compatibility

Designed as an OEM-style replacement or field-service fitting for compression tubing systems using 5/8-inch outside diameter tubing in HVAC, refrigeration, and plumbing applications.

Installation Notes

Installation is typically performed by a licensed HVAC technician or plumber. Before making any connections, shut off the system and relieve pressure from the tubing circuit. Ensure the tubing end is cut cleanly and squarely, and that the compression nut and ferrule are properly seated before tightening. Follow applicable local plumbing or mechanical codes, such as the IPC or IMC, when making compression fittings in pressurized systems.

Technical Specifications

• Tubing Outside Diameter: 5/8 inches
• Connection Type: Compression
• Fitting Angle: 90 degrees
• Material: Brass

Standard Information

• Brand: DIVERSITECH
• Manufacturer Part Number: A65I