Diversitech 7807 Liquidtight Electrical Whip 3/4 in X 6 Ft 8 Awg

Product Description

The DIVERSITECH 7807 is a liquidtight electrical whip assembly designed to provide a code-ready final connection between a disconnect box and a motor-driven load such as a pool pump, spa pump, or hot tub. The conduit is 3/4 inch trade size and 6 feet in length, constructed from non-metallic liquidtight flexible conduit rated for wet and outdoor environments. Internal wiring is 8 AWG THHN conductors. The assembly ships with one straight connector on one end and one 90-degree connector on the other, eliminating the need to field-fabricate fittings. Electricians and pool service technicians use this whip as a plug-and-play final-circuit solution.

The 7807 is suited for residential and light commercial applications including swimming pool pump motors, hot tub and spa installations, and other pump-driven equipment where a flexible, moisture-resistant conduit connection is required. The non-metallic construction resists corrosion in poolside and high-humidity environments. The dual-connector configuration—straight on one end, 90-degree on the other—accommodates common entry angles found on pool equipment enclosures and pump junction boxes without requiring additional fittings or adapters on site.

Key Features

• Non-metallic liquidtight flexible conduit resists corrosion in wet and outdoor environments
• 3/4 inch trade size conduit with 6-foot length for flexible equipment positioning
• 8 AWG THHN internal conductors rated for the ampacity demands of pool and spa pump motors
• One straight connector and one 90-degree connector included — no field fabrication of fittings required
• Designed for pool pump, spa, and hot tub final-circuit connections

Compatibility

Designed for use with swimming pool pumps, spa pumps, and hot tub equipment requiring a 3/4 inch liquidtight flexible non-metallic conduit whip connection at the final circuit.

Installation Notes

Installation should be performed by a licensed electrician in accordance with NEC Article 356 governing liquidtight flexible nonmetallic conduit and any applicable local amendments. Disconnect and lock out all power at the panel before making any wiring connections. Verify that conductor ampacity, circuit breaker rating, and equipment nameplate requirements are compatible before energizing. Do not exceed the conduit fill or bending radius limits specified for 3/4 inch liquidtight flexible non-metallic conduit.