Directedair da019lt-06 Long Radius Elbow 5/8 Copper

Product Description

The DIRECTEDAIR da019lt-06 is a 90-degree long radius copper elbow fitting designed for copper-to-copper refrigerant line and plumbing connections. With a 5/8 inch connection size on both ends and a long radius sweep, this fitting reduces flow turbulence and pressure drop compared to short radius alternatives. Built from solid copper and manufactured to industry-standard dimensions, it suits HVAC refrigerant line sets, ACR piping, and plumbing distribution systems where reliable, leak-free joints are required. Installation is handled by licensed HVAC technicians and plumbers working with copper tubing systems.

The da019lt-06 is suited for residential and light commercial applications involving 5/8 inch OD copper tubing. The long radius geometry makes it a preferred choice for refrigerant line routing where minimizing restriction is important, as well as for potable water and hydronic heating systems where smooth directional changes are specified. The fitting accepts standard copper sweat connections on both ends, making it compatible with common soldering and brazing workflows.

Key Features

• 90-degree long radius elbow geometry reduces flow resistance versus short radius fittings
• 5/8 inch copper connection on both ends for symmetrical installation
• All-copper construction meets standard dimensional and material composition requirements
• Compatible with sweat soldering and silver brazing installation methods
• Long radius sweep supports cleaner refrigerant and fluid flow paths

Compatibility

Designed as an OEM-style replacement and new-installation fitting for 5/8 inch OD copper tubing systems in HVAC refrigerant lines, ACR applications, and plumbing distribution piping.

Installation Notes

Installation should be performed by a licensed HVAC technician or plumber following applicable local mechanical and plumbing codes. Shut off and recover refrigerant or isolate and depressurize water lines before cutting into any existing system. Clean and deburr tube ends before fitting, apply appropriate flux, and braze or solder per standard copper joining procedures. For refrigerant applications, leak-test all joints after installation and before system recharge.