Dico 7200065 Wheel Brush 6 Inch 240 Grit Abrasive Nylon

Product Description

The DICO 7200065 is a 6-inch diameter wheel brush designed for surface finishing, deburring, and cleaning applications where controlled abrasion is required. Filled with abrasive nylon impregnated with 240-grit aluminum oxide, this brush delivers fine-grade material removal and surface conditioning without aggressive stock removal. The crimped fill pattern provides consistent contact pressure across irregular surfaces. Rated at a maximum of 3,600 RPM, it mounts via a standard round arbor hole measuring 5/8 inch and installs on bench grinders, angle grinders, or drill press arbors. Machinists, fabricators, and maintenance technicians use this brush for light deburring, weld cleanup prep, and surface blending on metal and composite workpieces.

This wheel brush suits general industrial and maintenance environments where a fine-grade, non-wire abrasive tool is preferred over steel wire brushes to avoid surface contamination or workpiece damage. The abrasive nylon fill makes it suitable for use on aluminum, stainless steel, plastics, and other materials where ferrous contamination from steel wire must be avoided. The 3/8-inch face width concentrates abrasive action along a narrow contact zone, making it effective for edge work and slot deburring as well as flat surface finishing.

Key Features

• 6-inch outside diameter with 3/8-inch face width for focused abrasive contact
• 240-grit aluminum oxide abrasive nylon fill — fine grade for surface conditioning and light deburring
• Crimped fill configuration maintains consistent brush pressure on contoured and flat surfaces
• Round arbor hole, 5/8-inch diameter, fits standard bench grinder and drill press arbors
• 3,600 RPM maximum rated speed for safe operation on common stationary and portable power tools
• No shank included — direct arbor mount configuration

Compatibility

Designed as an arbor-mount wheel brush for use on bench grinders, drill presses, and angle grinder arbor adapters equipped with a standard 5/8-inch round arbor hole.

Installation Notes

Installation should be performed by a qualified operator familiar with rotary abrasive tool safety. Power down and lock out the machine before mounting or removing the brush. Verify that the machine spindle speed does not exceed the 3,600 RPM maximum rating marked on the brush before operation. Eye protection and appropriate PPE are required during use in accordance with applicable ANSI abrasive safety standards.