Dfp Safety Corporation DXFP110050 Rooftop Safety Kit

Product Description

The DFP SAFETY CORPORATION DXFP110050 is a complete rooftop fall protection kit designed for use by roofing contractors, HVAC technicians, and other trades performing elevated work on residential and commercial rooftops. The kit combines a D1000 universal-fit full-body harness, a 50-foot vertical lifeline with rope adjustor, and a coated reusable hinged steel rooftop anchor with fasteners into a single ready-to-deploy package. The harness features pass-through leg buckle connections with 5 points of adjustment and is rated to 310 pounds alongside the included lanyard. All components meet ANSI Z359.1, Z359.11, and Z359.18 as well as OSHA 1910.66 and OSHA 1926.503 standards.

This kit is suited for residential and light commercial rooftop applications where a temporary fall arrest system is required. The hinged anchor design accommodates most common roof pitches, allowing quick installation without specialized hardware. The 50-foot poly steel rope lifeline includes an integrated energy absorber for fall arrest compliance. HVAC technicians, roofers, and service professionals working on sloped or flat rooftop surfaces will find this kit a practical all-in-one solution. The entire assembly stores in the included container for transport between job sites.

Key Features

• Complete kit includes full-body harness, 50-foot vertical lifeline with rope adjustor, and rooftop anchor with fasteners
• D1000 universal-fit harness with pass-through leg buckle connections and 5 points of adjustment
• Harness and lanyard rated to 310 pounds combined working weight
• Poly steel rope lifeline with snap hook and integrated energy absorber for fall arrest compliance
• Coated reusable hinged steel rooftop anchor fits most roof pitches and installs quickly
• Meets ANSI Z359.1, Z359.11, Z359.18, OSHA 1910.66, and OSHA 1926.503 standards
• Comes in a storage container for convenient transport and job site organization

Compatibility

Designed as a rooftop fall arrest system for use on most residential and commercial roof pitches where a temporary anchor point and vertical lifeline system are required per OSHA fall protection standards.

Installation Notes

Installation should be performed by a competent person as defined under OSHA 1926.502 fall protection requirements. The rooftop anchor must be fastened to structural roof members capable of supporting the required fall arrest loads per applicable standards. Inspect all components before each use and remove from service any harness, lifeline, or anchor that has been subjected to fall arrest forces. Refer to the manufacturer documentation for anchor fastener specifications and roof substrate requirements before installing.