Dexter Commercial ED1000RFEO3FT626 Rim Exit Device 3 Ft

Product Description

The DEXTER COMMERCIAL ED1000RFEO3FT626 is a Grade 1 rim exit device rated for fire-rated door assemblies. It features an exit-only trim configuration with a satin chrome finish and is designed for single-door commercial applications where panic hardware is required by code. The crossbar spans 3 feet, making it suited for standard commercial door widths. At 11.9 pounds, the unit is constructed for heavy-duty institutional use. Licensed locksmiths, door hardware specialists, and commercial contractors typically supply and install this hardware on fire-rated egress doors in compliance with applicable life safety codes.

This exit device is intended for commercial and institutional buildings where NFPA 101 or IBC egress requirements mandate listed panic hardware on fire-rated exit doors. Typical applications include schools, office buildings, retail facilities, and other occupancies requiring compliant exit hardware on doors that must remain operable from the egress side without a key or special knowledge. The exit-only function means there is no external trim — the door cannot be operated from the outside, directing occupants toward designated entry points.

Key Features

• Grade 1 commercial duty rating for high-traffic egress doors
• Fire-rated construction for use on listed fire-rated door assemblies
• Rim-mount design for straightforward installation on standard commercial doors
• Exit-only function — no outside trim, improving security at one-way egress points
• Satin chrome finish (626) for a clean, corrosion-resistant appearance
• 3-foot crossbar length fits standard commercial door widths

Compatibility

Designed as an OEM-style Grade 1 rim exit device for standard commercial single-door applications requiring fire-rated panic hardware.

Installation Notes

Installation should be performed by a licensed locksmith or qualified door hardware professional familiar with NFPA 80 and NFPA 101 requirements for fire-rated door assemblies. Confirm the door and frame are listed and labeled for fire-rated use before mounting hardware. Disengage power to any electrified components and verify the door is properly aligned and closes fully before final adjustment. Do not modify the device body or strike in any way that could compromise the fire listing.