Dewalt DW5436 Sds Plus Hammer Drill Bit 7/16 X 18 in

Product Description

The DEWALT DW5436 is a Rock Carbide SDS Plus hammer drill bit designed for rotary hammer drilling into concrete, masonry, and stone. At 7/16 inches in diameter with an 18-inch overall length and a 16-inch working length, this bit handles deep-hole applications where standard-length bits fall short. The SDS Plus shank provides positive bit retention and allows efficient hammer energy transfer during drilling. Rotary hammer operators and concrete trades rely on this type of bit for anchor bolt holes, rebar clearance, and structural penetrations in demanding field conditions.

This bit is suited for residential and commercial concrete drilling applications, including slab work, block walls, poured concrete foundations, and similar masonry substrates. The extended length makes it particularly useful when drilling through thick sections or when additional clearance is needed beyond the chuck. It is intended for use with SDS Plus rotary hammers only and is not compatible with standard keyed or keyless drill chucks.

Key Features

• Rock Carbide tip for durability in abrasive concrete and masonry materials
• SDS Plus shank for tool-free bit changes and secure chuck engagement
• 18-inch overall length with 16-inch working length for deep-hole drilling
• 7/16-inch diameter suits common anchor and fastener hole requirements
• Single-piece design minimizes failure points during high-impact operation

Compatibility

Designed for use with SDS Plus rotary hammers. The SDS Plus shank interface is a widely adopted standard, making this bit compatible with SDS Plus chucks across multiple rotary hammer brands and models.

Installation Notes

Installation should be performed by experienced operators familiar with rotary hammer operation and concrete drilling practices. Always wear appropriate PPE including eye protection and hearing protection when operating a rotary hammer. Inspect the bit shank and carbide tip for damage before each use, and ensure the rotary hammer is powered off and unplugged before inserting or removing the bit. Follow applicable OSHA and jobsite safety protocols when drilling into structural concrete or load-bearing masonry.

Technical Specifications

• Shank Type: SDS Plus
• Drill Diameter: 7/16 inches
• Working Length: 16 inches
• Overall Length: 18 inches
• Tip Material: Rock Carbide
• UPC: 028877441122
• Sold As: Each

Standard Information

• Brand: DEWALT
• Manufacturer Part Number: DW5436