Dewalt DW5418B25 Sds Plus Masonry Drill Bit 25 Pack

Product Description

The DEWALT DW5418B25 is a Rock Carbide SDS Plus masonry drill bit sold in a 25-pack. It is engineered for rotary hammer drilling into concrete, block, brick, and other masonry substrates. The bit measures 1/4 inch in diameter with a 6.5-inch usable length and an overall length of 8.5 inches. The serrated titanium carbide tip is designed to extend drilling life under heavy use. An improved flute geometry clears dust from the bore faster, reducing heat buildup and maintaining cutting speed. Licensed electricians, plumbers, and general contractors reaching into masonry for anchor setting will find this bit suited to high-volume production work.

This bit is designed for SDS Plus rotary hammers and is also compatible with standard 3/8-inch and 1/2-inch chucks using an appropriate adapter. It is well suited for residential and commercial installation work where masonry anchors must be set repeatedly and efficiently. The manufacturer rates the tip design to set up to 25 percent more anchors compared to standard masonry bits, making it a practical choice for anchor-heavy scopes such as electrical conduit strapping, pipe hangers, and structural fastening into concrete.

Key Features

• Rock Carbide SDS Plus tip for extended service life in hard masonry
• Serrated titanium carbide cutting edge rated for up to 25 percent more anchor sets
• Improved flute design evacuates dust quickly for sustained drilling speed
• Compatible with SDS Plus rotary hammers and standard 3/8-inch and 1/2-inch chucks via adapter
• Sold as a 25-pack for high-volume anchor setting applications

Compatibility

Fits SDS Plus rotary hammer chucks and is also compatible with standard 3/8-inch and 1/2-inch drill chucks using an appropriate SDS adapter.

Installation Notes

Installation is typically performed by electricians, plumbers, or general contractors using a rotary hammer in hammer-drill mode. Always power down and disconnect the tool before changing bits. Wear eye protection and a dust mask when drilling masonry, and follow applicable OSHA silica dust control requirements. Confirm anchor manufacturer specifications for hole diameter and depth before drilling.

Technical Specifications

• Bit Diameter: 1/4 inch
• Usable Length: 6.5 inches
• Overall Length: 8.5 inches
• Shank Type: SDS Plus
• Tip Material: Rock Carbide with serrated titanium carbide cutting edge
• Pack Quantity: 25
• Weight: 3.75 pounds
• UPC: 028874254183

Standard Information

• Brand: DEWALT
• Manufacturer Part Number: DW5418B25