Dewalt DNS18150-2 18 Gauge Construction Staple 1-1/2 in 2500 Pk

Product Description

The DEWALT DNS18150-2 is an 18-gauge steel construction staple designed for pneumatic fastening applications in framing, sheathing, and general construction work. Each staple features a 1.5-inch leg length and a 0.25-inch crown width with a chisel point for clean, consistent penetration into wood substrates. The copper finish provides corrosion resistance during storage and installation. This package contains 2500 staples, making it well-suited for high-volume fastening tasks on job sites. Licensed contractors and finish carpenters working with compatible pneumatic staplers will find this a direct-use consumable that requires no modification before loading.

These staples are intended for use in construction and rough carpentry applications where a narrow-crown 18-gauge fastener is required. The chisel point geometry reduces wood splitting in dense stock and maintains consistent drive depth when used with a calibrated pneumatic stapler. The 2500-count package is sized for sustained production work rather than small-batch repairs. The staples are compatible with the DWFP1838 pneumatic stapler as specified by the manufacturer.

Key Features

• 18-gauge steel construction for consistent strength and drive performance
• 1.5-inch leg length suits medium-depth fastening in wood framing and sheathing
• Chisel point reduces wood splitting and improves penetration consistency
• 0.25-inch crown width for narrow-crown pneumatic stapler applications
• Copper finish adds corrosion resistance during storage and use
• 2500-count package supports high-volume production stapling

Compatibility

Designed for use with the DWFP1838 pneumatic stapler per manufacturer specification. Verify stapler magazine calibration and crown width settings before loading.

Installation Notes

Installation should be performed by a qualified carpenter or contractor using a compatible pneumatic stapler. Disconnect the air supply from the tool before loading or clearing a jam. Verify that the stapler drive depth is set appropriately for the substrate before beginning production work. Follow all applicable jobsite safety requirements when operating pneumatic fastening tools.