Devcon 11470 Ceramic Epoxy Liquid 30 Lb Pail Gray

Product Description

The DEVCON 11470 is a gray ceramic epoxy compound in liquid form, part of the Wear Guard DFense Blok product line. It is formulated for surface protection and repair applications where chemical resistance and wear durability are critical requirements. The product ships in a 30 lb pail and requires a 2:1 mix ratio for proper activation and performance. Once applied, it requires a 16-hour cure time before reaching full set strength. It is rated for a maximum operating temperature of 300 degrees F. This compound is typically applied by maintenance technicians, industrial mechanics, and facility repair crews working on pumps, tanks, chutes, and other wear-prone components.

The DEVCON 11470 is suited for applications involving fiberglass and metal substrates that are exposed to chemical attack, abrasion, or erosion. Common use cases include lining or resurfacing industrial equipment surfaces, patching corroded or worn metal housings, and protecting pump casings and pipe fittings in chemical-handling environments. Its liquid form allows it to be poured or brushed into cavities and irregular surfaces before cure. This product is appropriate for both maintenance and repair operations in industrial and commercial facility settings.

Key Features

• Chemical-resistant ceramic epoxy formulation provides durable surface protection
• 2:1 mix ratio for controlled activation and consistent results
• 16-hour cure time before full strength is achieved
• Maximum operating temperature of 300 degrees F
• Compatible with fiberglass and metal substrates
• Packaged in a 30 lb pail for large-volume repair and coating applications

Compatibility

Designed for use on fiberglass and metal surfaces. Suitable for repair and protective coating of industrial components subject to chemical exposure and mechanical wear.

Installation Notes

Surface preparation is critical before application — substrate should be clean, dry, and free of oil, rust, and loose material. Measure and combine components at the specified 2:1 ratio; deviation from this ratio will compromise cure and final strength. Allow a minimum of 16 hours of cure time before returning the repaired component to service. Industrial maintenance technicians should follow applicable facility safety protocols and consult the product safety data sheet when handling epoxy compounds.