Deltana DSH44U26D Spring Hinge 4x4 Inches Satin Chrome

Product Description

The DELTANA DSH44U26D is a 4-inch x 4-inch spring hinge finished in satin chrome, designed for doors that require automatic self-closing action. The spring mechanism provides controlled return force, pulling the door closed after each use without a separate closer unit. This hinge is built for interior door applications where code compliance or facility management requires consistently closed doors. Installers in commercial and light-commercial environments will find this hinge a direct, hardware-only solution for self-closing requirements. At 0.8 pounds per unit, it is a compact component suited for standard door prep.

This spring hinge is appropriate for interior doors in residential and light-commercial settings, including office corridors, utility rooms, stairwell doors, and similar applications where a self-closing door is required. The satin chrome finish coordinates with contemporary and transitional hardware schemes. It is sold as a single unit and is typically installed by carpenters, general contractors, or door hardware specialists during new construction or renovation work.

Key Features

• Self-closing spring mechanism eliminates the need for a separate door closer on lighter doors
• 4 inches x 4 inches hinge size suits standard interior door applications
• Satin chrome finish provides a matte, corrosion-resistant surface
• Compact profile at 5.25 inches length x 2.8 inches width x 0.9 inches height
• Sold individually, allowing replacement or mixed installation as needed

Compatibility

Designed as a standard 4-inch x 4-inch spring hinge replacement or new-installation component for interior doors with a conventional hinge mortise preparation.

Installation Notes

Spring hinges are installed by carpenters or door hardware technicians using standard door hinge installation tools. Remove the door and ensure the mortise is cut to the correct depth before seating the hinge. The spring tension adjustment pin should be set after the door is hung and the swing is confirmed; follow the manufacturer tension-adjustment procedure included with the hinge. Check local building codes for self-closing door requirements, particularly in fire-rated door assemblies, before specifying this hinge as a code-compliance solution.