Delavan 00800-60a7 Oil Burner Nozzle 8.0 Gph 60 Degree

Product Description

The DELAVAN 00800-60a7 is a Type A hollow cone oil burner nozzle rated at 8.0 gallons per hour (GPH) with a 60-degree spray angle. It meters and atomizes fuel oil into a fine, hollow cone spray pattern, delivering consistent combustion performance in residential and light commercial oil-fired heating equipment. The hollow cone pattern is well suited to burner heads and retention rings that require a concentrated spray along the outer edge of the flame envelope. Licensed oil burner technicians and HVAC service pros install this nozzle as part of routine annual tune-up service.

This nozzle is used in oil-fired forced-air furnaces, boilers, and water heaters that call for an 8.0 GPH flow rate at a 60-degree spray angle with a hollow cone (Type A) pattern. It fits standard 9/16-inch by 24-thread nozzle adapters found on most domestic oil burner assemblies. The Type A designation indicates a hollow cone pattern, which is appropriate for burner applications requiring specific flame geometry to match the combustion head design. Always verify the required GPH, spray angle, and pattern type against the equipment manufacturer's burner specifications before installation.

Key Features

• 8.0 GPH flow rate for precise fuel metering at rated pump pressure
• 60-degree spray angle suits a range of standard oil burner head configurations
• Hollow cone (Type A) spray pattern concentrates atomized fuel at the outer spray perimeter
• Standard 9/16-inch by 24-thread fitting compatible with common domestic oil burner assemblies
• Designed for use with No. 1 and No. 2 fuel oil

Compatibility

Designed as an OEM-style replacement nozzle for residential and light commercial oil-fired furnaces, boilers, and water heaters requiring an 8.0 GPH, 60-degree, hollow cone Type A nozzle specification.

Installation Notes

Oil burner nozzle replacement is performed by licensed oil burner technicians or qualified HVAC service professionals. Before servicing, shut down the burner and allow the system to cool, then close the fuel supply valve at the oil supply line. Use a proper nozzle wrench to remove and install the nozzle to avoid damaging the adapter or electrode assembly. Follow all applicable local codes and the equipment manufacturer's service instructions when performing burner tune-up procedures.

Technical Specifications

• Flow Rate: 8.0 GPH
• Spray Angle: 60 degrees
• Spray Pattern: Hollow Cone
• Pattern Type: Type A

Standard Information

• Brand: DELAVAN
• Manufacturer Part Number: 00800-60a7