Delavan 00150-30b1 Oil Burner Nozzle 1.5 Gph 30 Degree

Product Description

The DELAVAN 00150-30b1 is a Type B Solid Cone oil burner nozzle rated at 1.5 GPH with a 30-degree spray angle. It features a brass body with a steel orifice disc and a sintered filter, rated for operation at 100 psi and up to 80 degrees F. The Solid Cone spray pattern distributes droplets uniformly throughout the complete pattern, delivering smooth ignition and efficient combustion. At flow rates above 8.00 GPH the pattern becomes progressively more hollow, but at 1.5 GPH this nozzle maintains a consistent, even distribution. Licensed oil burner technicians and HVAC service pros install and replace these nozzles during routine annual tune-ups and burner servicing.

This nozzle is rated for residential oil-fired heating applications. It is suited for use in smaller burners where a solid cone pattern at a 30-degree angle supports stable flame geometry and clean combustion. The 1.5 GPH flow rate is a common residential sizing used in oil-fired furnaces, boilers, and water heaters. It is particularly effective in larger residential burners where uniform droplet distribution throughout the spray pattern is important for combustion efficiency.

Key Features

• Type B Solid Cone spray pattern distributes droplets uniformly across the full pattern at 1.5 GPH
• Brass body construction with steel orifice disc for durability in oil service
• Sintered filter helps protect the orifice from contaminants in the fuel supply
• 30-degree spray angle suited for residential oil burner combustion chambers
• Rated to 100 psi operating pressure
• Manufactured under ISO 9001 quality standards

Compatibility

Designed as an OEM-style replacement nozzle for residential oil-fired heating equipment requiring a 1.5 GPH Type B Solid Cone nozzle with a 30-degree spray angle.

Installation Notes

Oil burner nozzles are replaced by licensed oil heat technicians or qualified HVAC service professionals during annual burner tune-ups or as part of a no-heat diagnosis. Always shut down the burner and allow the system to cool before servicing the nozzle assembly. Use a proper nozzle wrench to remove and install the nozzle without damaging the adapter or electrodes. Verify that the replacement nozzle flow rate, spray angle, and pattern type match the original equipment specifications before firing the burner.

Technical Specifications

• Product Type: Oil Burner Nozzle
• Spray Pattern: Type B Solid Cone
• Flow Rate: 1.5 GPH
• Spray Angle: 30 degrees
• Pressure Rating: 100 psi
• Temperature Rating: 80 degrees F
• Body Material: Brass
• Orifice Disc Material: Steel
• Filter Type: Sintered
• Application: Residential
• Applicable Standard: ISO 9001

Standard Information

• Brand: DELAVAN
• Manufacturer Part Number: 00150-30b1