De-sta-co FL-160/-- Straight Line Action Clamp 9000 N

Product Description

The DE-STA-CO FL-160/-- is a variable stroke straight line action clamp rated for 9,000 N (2,020 pounds) of clamping force. It uses hand lever actuation with a two-hand operating method, making it suitable for workholding, fixturing, and production line applications where positive, repeatable clamping is required. The flange mount configuration bolts directly to tooling plates, jigs, and fixtures. The 16 mm plunger diameter with M8 thread provides a robust contact point for holding workpieces securely through a maximum clamping stroke of 4 mm. At 2.6 pounds, the unit is compact enough for dense fixture layouts without sacrificing load capacity.

This clamp is designed for use in manufacturing, assembly, and fabrication environments where straight line clamping force is needed along a defined axis. The variable stroke design accommodates rapid approach up to 300 mm before transitioning to the 4 mm clamping stroke, which reduces operator cycle time in repetitive production settings. The flange mount and 9 mm mounting hole diameter allow integration into standard fixture plates. Overall height is 73 mm, and overall length varies by stroke configuration: 280 mm at 100 mm stroke, 380 mm at 200 mm stroke, and 480 mm at 300 mm stroke. Licensed machinists, toolmakers, and fixture builders are the primary installers.

Key Features

• 9,000 N (2,020 lb) load capacity for demanding workholding applications
• 300 mm maximum rapid stroke with 4 mm maximum clamping stroke for fast, precise engagement
• 16 mm plunger diameter with M8 thread for solid workpiece contact
• Two-hand actuation via hand lever promotes operator safety in production environments
• Flange mount design with 9 mm mounting holes for straightforward fixture integration
• Three overall length options depending on stroke selection: 280 mm, 380 mm, or 480 mm

Compatibility

Designed as a direct-fit flange mount straight line action clamp for industrial jigs, fixtures, and tooling plates requiring straight line clamping force along a defined axis. No specific equipment model compatibility was provided in the product data.

Installation Notes

Installation is typically performed by toolmakers, fixture designers, or maintenance technicians using standard metric fasteners through the 9 mm flange mount holes. Ensure the mounting surface is flat and rigid to maintain clamping accuracy and prevent fastener loosening under cyclic loads. Verify the plunger thread engagement and clamp travel are appropriate for the workpiece before full production use. Follow the equipment manufacturer's lockout and tagout procedures before installing or adjusting the clamp on any powered fixture or automated line.