De-sta-co 210-UR Toggle Clamp Vertical 600 Lb U-bar

Product Description

The DE-STA-CO 210-UR is a manual hold-down toggle clamp designed for vertical clamping applications requiring a reliable mechanical hold. Rated at 600 pounds (2,670 N) of holding capacity, it features a U-bar design with a fixed spindle end and a flanged base for secure four-point mounting. The straight red handle travels through 58 degrees of movement, and the bar opens to 103 degrees for workpiece access. Constructed from carbon steel with a zinc finish coating, the 210-UR is built for repeated industrial use in fixturing, welding, and assembly operations. A spindle, two flanged washers, and two nuts are included.

This clamp is suited for vertical hold-down duty in workholding fixtures, jigs, and assembly stations found in manufacturing and fabrication environments. The flanged base simplifies surface mounting to fixture plates or benchtops where bolt-pattern alignment is critical. The 3/8-16 fixed spindle with 2.35 inches of travel allows adjustment for varying workpiece thicknesses. Typical installers include tooling technicians, fixture builders, and machine operators in light-to-medium industrial settings.

Key Features

• 600 lb (2,670 N) rated holding capacity for demanding hold-down applications
• U-bar style with fixed spindle end and 2.35 inches of spindle travel for workpiece height adjustment
• 103-degree bar opening provides wide clearance for workpiece loading and unloading
• 58-degree handle movement keeps actuation stroke compact in tight fixture layouts
• Flanged base with four mounting holes and 0.33-inch mounting hole diameter for rigid surface mounting
• Carbon steel construction with zinc finish coating for durability and corrosion resistance
• Includes spindle, two flanged washers, and two nuts - ready to mount

Compatibility

Designed as an OEM-style hold-down toggle clamp for use in standard vertical clamping applications on fixture plates, welding jigs, and assembly benches where a flanged base and U-bar configuration are specified.

Installation Notes

Install using four fasteners through the flanged base mounting holes; verify the mounting surface is flat and rigid to maintain rated holding capacity. Set spindle height before final tightening to ensure proper clamping force on the workpiece. Always confirm the clamp is fully locked over-center before initiating any machining, welding, or assembly operation. Fixture builders should consult applicable workholding standards and facility safety procedures when integrating toggle clamps into production tooling.