De-sta-co 202208 Cap Tip Spindle Assembly 1/4-20

Product Description

The DE-STA-CO 202208 is a cap tip clamp spindle assembly designed for use with manual-operated toggle clamps. Constructed from carbon steel with a 1/4-20 thread size, it delivers a thread length of 1.08 inches and an overall length of 1.63 inches. The flat neoprene tip cap measures 0.63 inches in tip surface diameter and is rated at 70-80A hardness, providing a firm yet non-marring contact surface. A jam nut is included for position locking. This assembly is installed by HVAC, mechanical, and industrial technicians working with toggle-clamp fixtures and workholding setups.

This spindle assembly is suited for manual-operated toggle clamp applications in production, fabrication, and assembly environments. The neoprene flat cap tip protects workpiece surfaces during clamping and is rated for a minimum operating temperature of -22 degrees F, making it appropriate for cold-environment industrial service. It ships as a single unit and replaces worn or damaged spindle assemblies on existing toggle clamp bodies.

Key Features

• Carbon steel spindle with 1/4-20 thread for secure, repeatable positioning
• Flat neoprene tip cap rated 70-80A Shore hardness for surface protection
• Tip surface diameter of 0.63 inches with tip maximum diameter of 0.47 inches
• Overall length of 1.63 inches with a thread length of 1.08 inches
• Includes jam nut for locking spindle at desired extension
• Rated for use down to -22 degrees F minimum operating temperature

Compatibility

Designed for use with manual-operated toggle clamps requiring a 1/4-20 threaded spindle assembly with a flat cap tip configuration.

Installation Notes

Installation is typically performed by mechanical or industrial maintenance technicians. Thread the spindle into the clamp body by hand before tightening the jam nut to lock the tip at the correct clamping depth. Ensure the toggle clamp is fully open and relieved of any clamping load before removing or installing the spindle assembly. Do not overtighten the jam nut against the clamp body in a way that stresses the thread engagement.