De-sta-co 2010-S Toggle Clamp 1400 Lb Vertical Flanged

Product Description

The DE-STA-CO 2010-S is a manual hold-down toggle clamp designed for vertical clamping applications in fabrication, assembly, and fixturing work. It delivers a holding capacity of 1,400 pounds (6,230 N) through a solid bar with a closed bar end, making it well suited for securing workpieces against a flat surface. The flanged base provides four-point mounting for stable positioning on jigs, fixtures, and work tables. Built from carbon steel with a zinc finish coating, the 2010-S is intended for industrial environments where repeatable clamping force and durable construction are required. Licensed machinists, tool and die makers, and fixture builders are the primary installers.

This clamp is used in manufacturing and assembly operations where a workpiece must be held firmly in place during drilling, welding, machining, or inspection. The vertical handle orientation and 66-degree handle movement allow the operator to engage and release the clamp quickly in repetitive production cycles. The 78-degree bar opening provides adequate clearance for part loading and unloading. A bolt retainer is included. The M10x1.5 spindle thread allows fine adjustment of clamping height to accommodate varying workpiece thicknesses.

Key Features

• 1,400 lb (6,230 N) holding capacity for demanding fixturing applications
• Vertical handle orientation with 66-degree handle movement for fast actuation
• 78-degree bar opening for easy workpiece loading and clearance
• Flanged base with four mounting holes for rigid, stable fixture mounting
• M10x1.5 adjustable spindle with bolt retainer included
• Carbon steel construction with zinc finish coating for corrosion resistance

Compatibility

Designed as an OEM-style replacement or direct addition for standard vertical hold-down toggle clamp applications using a flanged base and solid bar configuration in industrial fixturing and assembly setups.

Installation Notes

Installation is performed by machinists, fixture builders, or mechanical assemblers. Power down or de-energize any associated automated equipment before mounting or adjusting the clamp. Use appropriately sized fasteners through the four flanged base mounting holes, sized for the 0.34-inch diameter mounting holes. Adjust the M10x1.5 spindle to the correct clamping height before placing the clamp into service; verify the toggle locks fully into the over-center position before applying load.