Dap 7079808640 Silicone Kitchen Bath Sealant White 9.8 Oz

Product Description

The DAP 7079808640 is a 100% silicone rubber sealant formulated for kitchen and bathroom applications where lasting moisture resistance is required. The cured sealant is fully waterproof, stays flexible over time, and resists cracking. It is rated mold and mildew resistant and carries FDA Reg 21, CFR 177.2600 compliance, making it safe for incidental food contact. Available in white, the 9.8 oz cartridge is sized for standard caulk guns and is suited for interior plumbing and finish work performed by plumbers, tile setters, and general contractors.

This sealant is intended for interior use in residential and light commercial settings. Typical applications include tub and tile surrounds, sink perimeters, countertop-to-wall joints, and fixture penetrations in kitchens and bathrooms. The 100% silicone formulation makes it appropriate where paint-over capability is not required but long-term flexibility and water resistance are critical. Plumbers and tile contractors commonly specify silicone sealant in wet-zone joints where grout or latex caulk would fail prematurely.

Key Features

• 100% silicone rubber formula provides a fully waterproof, flexible seal
• Cured material is mold and mildew resistant for long-term performance in wet areas
• Meets FDA Reg 21, CFR 177.2600 for incidental food contact safety
• Remains flexible after cure and will not crack or shrink over time
• White color matches standard tub, tile, and fixture finishes
• 24-month shelf life when stored properly

Compatibility

Designed for interior kitchen and bathroom use on non-porous surfaces including ceramic tile, porcelain, glass, fiberglass, and glazed surfaces where a waterproof silicone seal is required.

Installation Notes

Installation is typically performed by licensed plumbers or tile contractors using a standard caulk gun. Surfaces must be clean, dry, and free of old caulk, soap residue, and grease before application. Allow adequate cure time before exposing the joint to water. Silicone sealant is not paintable; select a product accordingly if a painted finish is needed over the joint.

Technical Specifications

• Size: 9.8 oz
• Color: White
• Formula: 100% Silicone Rubber
• Application: Interior
• FDA Compliance: FDA Reg 21, CFR 177.2600
• Shelf Life: 24 months
• Height: 11.25 inches
• Width: 2 inches
• Depth: 2 inches
• Weight: 0.629 pounds

Standard Information

• Brand: DAP
• Manufacturer Part Number: 7079808640