Custom Bldg Products PBPG3827-4 Sanded Grout 7 Lb Bone

Product Description

The CUSTOM BLDG PRODUCTS PBPG3827-4 is a polymer-modified, cement-based sanded grout formulated for hard, dense tile and stone joints. Sold in a pack of 4 units at 7 pounds each, this product meets ANSI A118.7 standards and is designed to resist shrinking, cracking, and wear over time. The Bone colorway provides a neutral finish suited to a wide range of tile applications. Accommodating joint widths from 1/8 inch to 1/2 inch, it delivers consistent color and structural performance in demanding installation environments. Licensed tile setters and professional installers are the primary users of this product.

PBPG3827-4 is rated for both interior and exterior use, making it appropriate for residential and light commercial projects. Suitable installation locations include floors, countertops, walls, ceilings, showers, fountains, and pools. The sanded formula is specifically engineered for joints in the 1/8 inch to 1/2 inch range, which covers the majority of standard ceramic, porcelain, and natural stone tile layouts. Its cement-based composition handles the moisture exposure typical of wet-area installations such as showers and pool surrounds.

Key Features

• ANSI A118.7 certified polymer-modified, cement-based sanded grout
• Accommodates joint widths from 1/8 inch to 1/2 inch
• Resists shrinking, cracking, and surface wear
• Suitable for interior and exterior applications
• Bone color finish with consistent, repeatable color results
• Sold as a pack of 4 units, 7 pounds each

Compatibility

Designed for use as a sanded grout in standard tile and stone installations with joint widths between 1/8 inch and 1/2 inch, including floors, countertops, walls, ceilings, showers, fountains, and pools, for both interior and exterior settings.

Installation Notes

Installation should be performed by a qualified tile setter following applicable industry standards such as ANSI A108 and Tile Council of North America guidelines. Mix product thoroughly per manufacturer directions and allow proper open time before tooling joints. Ensure substrate is clean, flat, and free of contaminants before grouting. Protect freshly grouted surfaces from water and foot traffic until fully cured.