Custom Bldg Products PBPG1657-4 Sanded Grout 7 Lb 4 Pack

Product Description

The CUSTOM BLDG PRODUCTS PBPG1657-4 is a polymer-modified, cement-based sanded grout in Delorean Gray, sold as a case of four 7-pound units. It meets ANSI A118.7 standards and produces hard, dense joints that resist shrinking, cracking, and wear over time. Designed for joint widths from 1/8 inch to 1/2 inch, this grout delivers consistent finished color and improved performance compared to standard cement grout formulations. It is suited for tile and stone installations handled by licensed tile setters, flooring contractors, and general contractors on both residential and commercial projects.

This sanded grout is formulated for interior and exterior applications across a wide range of surfaces. Appropriate settings include floors, countertops, walls, ceilings, showers, fountains, and pools. The polymer-modified formula supports installations where color consistency and joint durability are critical to the finished result. It performs in wet and dry environments, making it a practical choice for both field and finish tile work.

Key Features

• ANSI A118.7 certified polymer-modified, cement-based formula
• Accommodates joint widths from 1/8 inch to 1/2 inch
• Resists shrinking, cracking, and wear in grouted joints
• Consistent Delorean Gray color across batches
• Suitable for interior and exterior use including wet areas such as showers, fountains, and pools
• Packaged as four 7-pound units per case for a total of 28 pounds

Compatibility

Designed for use with ceramic, porcelain, and natural stone tile installations on floors, walls, countertops, ceilings, showers, fountains, and pools in interior or exterior settings where 1/8 inch to 1/2 inch sanded grout joints are specified.

Installation Notes

Installation should be performed by a qualified tile setter or flooring contractor following TCNA handbook guidelines and applicable local building codes. Mix grout to a uniform consistency per manufacturer directions and allow proper slake time before application. Remove excess grout from tile faces before it hardens, and allow full cure time before exposing joints to water or heavy traffic. Do not use in joints narrower than 1/8 inch or wider than 1/2 inch.