Custom Bldg Products PBPG0910 Sanded Grout 10 Lb Natural Gray

Product Description

The CUSTOM BLDG PRODUCTS PBPG0910 is a polymer-modified, cement-based sanded grout formulated for use with highly glazed or polished tile, marble, and natural stone. Rated to ANSI A118.6, this non-shrinking grout accommodates joint widths up to 1/8 inch and delivers consistent finished color across installations. It builds on the original Polyblend formula with enhancements targeting performance, color accuracy, and color uniformity. Tile setters and flooring contractors install this grout in both interior and exterior settings where joint scratch sensitivity is a concern. The 10-pound bag covers standard residential and light commercial scopes.

PBPG0910 is suited for a wide range of interior and exterior applications, including floors, countertops, walls, ceilings, showers, fountains, and pools. Its non-sanded composition makes it the correct choice wherever sanded grout would abrade or scratch polished or glazed tile surfaces and natural stone. The product is packaged four units per case, making it practical for multi-bag project orders.

Key Features

• ANSI A118.6 rated polymer-modified, cement-based non-sanded grout
• Non-shrinking formula accommodates joints up to 1/8 inch wide
• Safe for use on highly glazed or polished tile, marble, and natural stone
• Suitable for interior and exterior installations including showers, fountains, and pools
• Enhanced color consistency and finished color performance over original Polyblend
• Natural Gray colorway for broad compatibility with stone and tile palettes

Compatibility

Designed for use with highly glazed or polished tile, marble, and natural stone in joint widths up to 1/8 inch. Appropriate for floors, countertops, walls, ceilings, showers, fountains, and pools in both interior and exterior installations.

Installation Notes

This product is typically installed by tile setters or flooring contractors following TCNA handbook guidelines. Ensure the substrate is clean, cured, and free of contaminants before grouting. Mix only the quantity that can be worked within the open time, and keep the material out of joints until the tile adhesive or mortar has fully cured. Follow all manufacturer mixing and cure time directions before exposing grouted surfaces to water or foot traffic.