Crc Industries 3284 Dry Moly Lubricant Spray 11 Oz

Product Description

The CRC INDUSTRIES 3284 is a dry molybdenum disulfide (moly) lubricant in an aerosol can, engineered to reduce torque on threaded assemblies and sliding surfaces. The gray, fast-evaporating film leaves a dry molybdenum disulfide layer that handles continuous operating temperatures up to 650 degrees F and intermittent peaks up to 750 degrees F. It is classified as a Level III flammable aerosol with a flash point below 0 degrees F, so storage and handling require appropriate care. Licensed trades in HVAC, plumbing, oil and gas, and general mechanical service install this product wherever a dry, clean lubricating film is needed on metal assemblies.

The 3284 is formulated as a surface spray lubricant for applications where wet or grease-based lubricants would attract contaminants or interfere with assembly fit. The manufacturer specifically notes suitability for drill pipe lubrication in oil and gas service. It also sees use in mechanical assembly operations, threaded fastener installation, and any joint or sliding interface that requires torque reduction without liquid residue. The propellant is hydrocarbon and the VOC content is 66.3 percent, which must be considered for compliance with local air-quality regulations before use.

Key Features

• Dry molybdenum disulfide base forms a clean, non-greasy lubricating film
• Rated for continuous service up to 650 degrees F and intermittent service up to 750 degrees F
• Fast evaporation rate leaves only the dry film — no wet residue
• Aerosol delivery provides even surface coverage on assemblies and pipe threads
• Reduces torque on threaded and sliding metal assemblies
• Made in USA by CRC Industries, Inc.

Compatibility

Designed as a surface spray lubricant for metal assemblies requiring dry-film torque reduction, including drill pipe and threaded fastener applications in oil and gas, mechanical, and industrial service environments.

Installation Notes

Application is performed by qualified tradespeople or mechanical technicians working on assemblies that require dry lubrication. Shake the can thoroughly before use and apply from an appropriate distance to achieve an even film. Because this product carries an Aerosol Flammability Level III rating and a flash point below 0 degrees F, keep it away from open flames, sparks, and high-heat sources during application. Consult local air-quality regulations regarding VOC limits before use in enclosed or regulated work environments.

Technical Specifications

• Base Type: Molybdenum Disulfide
• Film Type: Dry
• Color: Gray
• Container Type: Aerosol Can
• Container Size: 11 oz
• Temperature Rating (Continuous): 650 degrees F
• Temperature Rating (Intermittent): 750 degrees F
• Flash Point: Less than 0 degrees F
• Boiling Point: 132.9 degrees F
• Cloud Point: -138.8 degrees F
• Evaporation Rate: Fast
• Propellant: Hydrocarbon
• VOC Percent: 66.3%
• Aerosol Flammability Level: Level III
• Specific Gravity: 0.773
• Physical State: Liquid
• Odor: Solvent
• Dimensions: 2.63 inches W x 2.63 inches D x 7.75 inches H
• Country of Origin: USA

Standard Information

• Brand: CRC INDUSTRIES
• Manufacturer Part Number: 3284