Crc 1003350 Dry Film Moly Penetrant Lubricant 11 Oz

Product Description

The CRC 1003350 is a dry film penetrant lubricant formulated with molybdenum disulfide (moly) and delivered in an 11 oz aerosol can. It lays down a dark gray, solid-film coating that reduces friction between metal surfaces under conditions where liquid lubricants fail. The moly base provides reliable performance from -30 degrees F up to 650 degrees F, making it suitable for extreme-pressure and high-temperature applications. HVAC technicians, machinists, electricians, and maintenance professionals use this product on fasteners, linkages, slides, and bearing surfaces where conventional oils or greases would burn off, migrate, or attract contaminants.

This penetrant lubricant is designed for industrial and trade environments where surfaces are exposed to high loads, high heat, or both. Common application scenarios include lubricating furnace linkage arms, damper pivots, exhaust system fasteners, threaded fittings subjected to heat, and sliding components inside HVAC equipment. It is not rated food-grade and is not intended for food-processing environments. The aerosol format allows fast, targeted application in confined spaces without requiring brushes or rags.

Key Features

• Dry film with molybdenum disulfide base resists washout and migration
• Operating range: -30 degrees F to 650 degrees F
• Rated for extreme-pressure and high-temperature service
• VOC content: 3.66 lb/gal (438.78 g/L) — VOC compliant
• RoHS compliant formulation
• 11 oz aerosol can for fast, controlled application
• Flammable — flash point -20 degrees F (-29 degrees C); keep away from ignition sources during application

Compatibility

Designed as a general-purpose dry film penetrant lubricant for use on metal surfaces in HVAC, mechanical, and industrial maintenance applications where extreme pressure or elevated temperatures are present.

Installation Notes

Apply only in well-ventilated areas away from open flames, pilot lights, and other ignition sources — this product is flammable with a low flash point. Shake the can thoroughly before use and allow the dry film coating to fully cure before exposing the surface to heat or load. Licensed HVAC technicians and qualified maintenance professionals should follow applicable safety data sheet (SDS) guidance when handling this aerosol. Store the can away from heat sources and direct sunlight.