Crc 1003258 Food Grade Penetrant Lubricant 16 Oz

Product Description

The CRC 1003258 is a food-grade penetrant lubricant supplied in a 16 oz spray bottle. It lays down a non-drying film that penetrates tight tolerances, loosens corroded fasteners, and provides lasting lubrication on metal surfaces. The formulation carries NSF H2 registration, making it suitable for use in food processing and beverage facilities where incidental food contact is a concern. It is non-flammable, VOC compliant, and rated for operation from -50 degrees F to 250 degrees F. HVAC technicians, maintenance mechanics, and food-facility service professionals are the primary users.

This penetrant lubricant is suited for light industrial, commercial, and food-processing environments where a non-drying, food-safe lubricant is required. Typical applications include lubricating bearings, chains, hinges, and threaded fasteners in areas subject to sanitation requirements. The spray bottle format allows targeted application in confined or hard-to-reach spaces. Because the product is non-flammable and VOC compliant, it is appropriate for use in facilities with strict safety and environmental standards.

Key Features

• NSF H2 registered and USDA accepted — suitable for food processing and beverage facilities
• Non-drying film composition maintains lubrication without gumming or residue buildup
• Operating range from -50 degrees F to 250 degrees F covers most light industrial service conditions
• Non-flammable formula with a flash point of 192 degrees F (89 degrees C)
• Maximum dielectric strength of 38,800 volts supports use around electrical components
• VOC compliant and RoHS compliant for facilities with environmental and regulatory requirements

Compatibility

Designed for use on metal fasteners, hinges, chains, bearings, and similar components in food-grade and general light industrial service environments where a non-drying penetrant lubricant is required.

Installation Notes

Application is performed by maintenance technicians and facility service professionals. Before applying to powered equipment, de-energize the system and follow lockout/tagout procedures per applicable safety standards. Shake the spray bottle before use and apply directly to the target surface from a short distance for controlled coverage. Allow the penetrant to dwell on corroded fasteners before applying torque.