Coxreels 1275HPL-4-8-A Dual Hydraulic Hose Reel 135 Ft

Product Description

The COXREELS 1275HPL-4-8-A is a dual hydraulic hose reel engineered for high-pressure applications in mobile and stationary service environments. Rated to 10,000 psi, it accommodates hose with a 1/4 inch ID and 1/2 inch OD up to 135 feet in length. The reel features a hand crank or motorized drive configuration, a CPC powder coat finish for corrosion resistance, and a fully welded 12-gauge steel A-frame base. Permanently lubricated, self-aligning pillow block bearings support smooth drum rotation under continuous high-cycle use. This unit is designed for installation by hydraulics technicians and experienced service professionals.

The 1275HPL-4-8-A is built for dual hydraulic service lines in demanding field and shop applications, including emergency rescue systems and high-pressure hydraulic tooling. The open drum slot and low-profile outlet riser design allow a flat, non-crimping hose wrap, which is critical when working with stiff, high-pressure hydraulic hose. The heavy-duty CNC-spun and ribbed discs with rolled edges protect hose integrity and improve operator safety during deployment and retraction. This reel suits commercial and industrial environments where dual hydraulic circuits must be managed reliably at sustained high pressure.

Key Features

• Rated to 10,000 psi for hand crank and motorized models up to 200 feet
• Two high-pressure 90-degree full-flow melanized steel 1/4 inch swivels for dual hydraulic circuits
• Low-profile outlet riser and open drum slot design delivers a non-crimping, flat hose wrap
• CNC robotically welded one-piece 12-gauge steel A-frame base for rigid reel structure
• CNC robotically spun and ribbed discs with rolled edges for hose protection and operator safety
• Permanently lubricated, self-aligning pillow block bearings for smooth, trouble-free rotation
• CPC powder coat finish provides chip resistance and rust inhibition

Compatibility

The 1275HPL-4-8-A is part of the COXREELS 1275HP Series and is designed for dual hydraulic hose management applications including emergency rescue systems and other high-pressure hydraulic tool circuits.

Installation Notes

Installation should be performed by a qualified hydraulics technician or mechanical professional familiar with high-pressure fluid systems. Depressurize and isolate all hydraulic lines completely before mounting or connecting the reel. Ensure the mounting surface can support the reel weight and dynamic hose tension loads. Verify all swivel fittings and hose connections are rated for the system operating pressure before returning the circuit to service.

Technical Specifications

• Hose ID: 1/4 inch
• Hose OD: 1/2 inch
• Hose Length Capacity: 135 feet
• Maximum Working Pressure: 10,000 psi
• Length: 25.5 inches
• Width: 22 inches
• Height: 22 inches
• Weight: 50 pounds
• Frame Material: 12-gauge steel
• Finish: CPC powder coat
• UPC: 674255831186

Standard Information

• Brand: COXREELS
• Manufacturer Part Number: 1275HPL-4-8-A