Coxreels 1275-6-75-EF Dual Hose Reel 1 in 75 Ft Motorized

Product Description

The COXREELS 1275-6-75-EF is a dual hose reel from the 1275 Series, built for large-capacity industrial and commercial hose management applications. It accommodates hose with a 1 inch inner diameter and handles up to 75 feet of hose length. The reel ships with a 24-volt DC, 1/3 HP reversible electric motor for powered rewind, though hand crank operation is also supported. Two machined brass 90-degree full-flow NPT swivels provide leak-resistant connections, and the one-piece all-welded steel A-frame construction delivers rigid, bolt-free mounting. Licensed technicians and industrial service professionals are the typical installers for this class of reel.

The 1275-6-75-EF is suited for high-volume fluid transfer in industrial plants, fleet maintenance facilities, service bays, and commercial wash-down operations where large-diameter hose and long hose runs are required. The dual-plumbing configuration features two swivel inlets and two low-profile outlet risers aligned with an open drum slot, producing a non-crimping, flat, smooth hose wrap that extends hose service life. This design is particularly effective where hose integrity under repeated cycling is critical to uptime.

Key Features

• 24-volt DC, 1/3 HP reversible electric motor for powered rewind; hand crank operation also supported
• Two machined solid-brass 90-degree full-flow NPT swivels allow seal maintenance and hose swaps without removing the reel from its mount
• Dual low-profile outlet risers and open drum slot deliver a non-crimping, flat hose wrap
• One-piece all-CNC robotically welded 12-gauge steel A-frame base provides superior structural rigidity over bolted designs
• Permanently lubricated, self-aligning pillow block bearings for smooth drum rotation and long service intervals
• CNC spun and ribbed steel discs with rolled edges protect hose edges and improve operator safety
• CPC powder coat finish resists chips and rust for extended service life in harsh environments

Compatibility

Designed for use with 1 inch inner diameter hose up to 75 feet in length; part of the COXREELS 1275 Series dual hose reel platform intended for large-capacity industrial and commercial fluid transfer applications.

Installation Notes

Installation should be performed by a qualified technician familiar with industrial hose reel systems and low-voltage DC electrical connections. Shut off fluid supply and de-energize the 24-volt DC power circuit before mounting or servicing the reel. Secure the reel to a structural surface using the mounting pattern located in the steel base, following applicable facility load and fastener requirements. Verify all NPT swivel connections are properly sealed and leak-tested before returning the system to service.

Technical Specifications

• Hose Inner Diameter: 1 inch
• Hose Outer Diameter: 1 7/16 inches
• Hose Capacity: 75 feet
• Motor Voltage: 24 volts DC
• Motor Output: 1/3 HP
• Motor Type: Reversible electric
• Frame Material: 12-gauge steel, one-piece CNC robotically welded
• Swivel Material: Solid brass, NPT, 90-degree full-flow
• Finish: CPC powder coat
• Length: 31 inches
• Width: 24 inches
• Height: 27 inches
• Weight: 81 pounds
• UPC: 674255852662

Standard Information

• Brand: COXREELS
• Manufacturer Part Number: 1275-6-75-EF