Coxreels 1275-6-150-A Dual Hose Reel 150 Ft 1 Inch Id

Product Description

The COXREELS 1275-6-150-A is a large-capacity dual hose reel from the 1275 Series, built for demanding industrial and commercial applications. It accommodates hose with a 1-inch inner diameter and a 1 7/16-inch outer diameter, with a working capacity of 150 feet. The unit features dual plumbing with two swivel inlets and two low-profile outlet risers that work with an open drum slot to produce a flat, non-crimping hose wrap. The one-piece all-welded steel A-frame provides rigid, weld-built structure rather than bolted assembly, and a positive gear drive rewind delivers consistent, repeatable operation. Installed by industrial maintenance technicians, plumbers, or fluid-handling contractors in fixed or mobile service setups.

The 1275-6-150-A is suited for high-volume fluid transfer in industrial plants, service facilities, agriculture operations, and construction sites where large hose capacity and dual-circuit plumbing are required. The open drum slot and low-profile outlet riser design support smooth hose layering across the full spool width, reducing wear on hose cover and fittings during repeated extend-and-retract cycles. The unit ships as a single assembly and can be configured for hand crank or motorized rewind depending on application demand.

Key Features

• Dual plumbing with two machined solid-brass 90-degree full-flow NPT swivels for simple seal service without removing the reel from its mount
• Two low-profile outlet risers and open drum slot design produce a flat, non-crimping hose wrap across 150 feet of hose
• One-piece CNC robotically welded 12-gauge steel A-frame base for superior structural rigidity versus bolted alternatives
• Heavy-duty CNC robotically spun and ribbed discs with rolled edges for hose protection and operator safety
• Permanently lubricated, self-aligning pillow block bearings for smooth drum rotation and long service life
• CPC powder coat finish resists chipping and rust for extended service in demanding environments

Compatibility

Designed for use with hose rated at 1-inch inner diameter and 1 7/16-inch outer diameter, up to 150 feet in length. Compatible with hand crank or motorized rewind drive configurations within the COXREELS 1275 Series.

Installation Notes

Installation should be performed by a qualified technician familiar with fluid-handling systems and industrial reel mounting. Depressurize and drain all hose and supply lines before mounting or servicing the reel. The mounting pattern is located in the steel base plate for straightforward anchoring to a fixed surface or mobile service unit. Verify inlet and outlet plumbing connections are rated for the intended working pressure before returning the system to service.

Technical Specifications

• Hose Inner Diameter: 1 inch
• Hose Outer Diameter: 1 7/16 inches
• Hose Capacity: 150 feet
• Frame Material: 12-gauge steel, CNC robotically welded
• Length: 37 inches
• Width: 28 inches
• Height: 31 inches
• Weight: 93 pounds
• Finish: CPC powder coat
• Unit of Measure: Each

Standard Information

• Brand: COXREELS
• Manufacturer Part Number: 1275-6-150-A