Coxreels 1275-4-50-EF Dual Hose Reel 1/2 Inch 50 Ft

Product Description

The COXREELS 1275-4-50-EF is a dual hose reel from the 1275 Series, built for large-capacity industrial and commercial applications. It accepts hose with a 1/2 inch ID and 7/8 inch OD up to 50 feet in length. The reel supports both hand crank and motorized operation, with a 24-volt DC, 1/3 HP reversible motor included. Dual plumbing runs through two machined brass 90-degree full-flow NPT swivel inlets and two low-profile outlet risers, producing a flat, non-crimping hose wrap. The one-piece all-welded steel A-frame construction provides rigid, bolt-free support. Licensed HVAC, plumbing, and industrial service technicians install this reel in permanent and semi-permanent service bays, wash-down stations, and fluid transfer setups.

This reel is suited to demanding service environments where hose capacity, durability, and reliable retraction are critical. The open drum slot design and dual low-profile outlet risers keep hose lay flat and protect against kinking during high-cycle use. The CPC powder coat finish resists chipping, rust, and chemical exposure, making it appropriate for shop floors, wash bays, lube rooms, and similar heavy-use settings. The mounting pattern is built into the steel base, which simplifies permanent installation and allows detachment without removing the entire reel assembly from its mount.

Key Features

• Dual plumbing with two machined solid brass 90-degree full-flow NPT swivel inlets for simple seal maintenance and hose installation without removing the reel from its mount
• 24-volt DC, 1/3 HP reversible motorized rewind with hand crank option for operational flexibility
• Two exclusive low-profile outlet risers and open drum slot provide a flat, non-crimping hose wrap for 1/2 inch ID, 7/8 inch OD hose up to 50 feet
• One-piece all CNC robotically welded 12-gauge steel A-frame base for superior rigidity and strength without bolted joints
• Heavy-duty CNC robotically spun and ribbed discs with rolled edges for hose protection, durability, and operator safety
• Permanently lubricated, self-aligning pillow block bearings for smooth rotation and long service life
• Long-lasting CPC powder coat finish resists chips, rust, and corrosion in harsh service environments

Compatibility

Designed for use with 1/2 inch ID, 7/8 inch OD hose up to 50 feet in large-capacity dual-hose reel applications requiring motorized or hand crank retraction.

Installation Notes

Installation is typically performed by licensed plumbers, fluid-system technicians, or industrial maintenance professionals. Mount the reel to a structural surface using the integrated base mounting pattern before connecting hose or fluid lines. Shut off and depressurize all supply lines before making swivel inlet connections or performing any maintenance on the reel. Verify that the 24-volt DC power supply is properly sized and that all electrical connections comply with applicable NEC requirements before energizing the motor.

Technical Specifications

• Hose ID: 1/2 inch
• Hose OD: 7/8 inch
• Hose Capacity: 50 feet
• Motor Voltage: 24 volts DC
• Motor Output: 1/3 HP
• Motor Type: Reversible
• Frame Material: 12-gauge steel, CNC robotically welded
• Finish: CPC powder coat
• Swivel Inlets: Two machined solid brass 90-degree full-flow NPT
• Length: 25.5 inches
• Width: 22 inches
• Height: 22 inches
• Weight: 53 pounds
• UPC: 674255856998

Standard Information

• Brand: COXREELS
• Manufacturer Part Number: 1275-4-50-EF