Coxreels 1275-4-200-ED Dual Hose Reel 200 Ft Electric

Product Description

The COXREELS 1275-4-200-ED is a heavy-duty dual hose reel built for large-capacity industrial and commercial applications. It accepts hose with a 1/2 inch inner diameter and 7/8 inch outer diameter, and it holds up to 200 feet of hose. The reel is powered by a 12-volt DC, 1/2 HP explosion-proof reversible motor, making it well suited for hazardous or demanding environments. An all-welded one-piece steel A-frame provides rigid structural support, while permanently lubricated pillow block bearings keep rotation smooth over long service intervals. Licensed contractors and industrial maintenance crews are the typical installers for this reel series.

The 1275-4-200-ED is designed for large-capacity dual-hose applications in industrial plants, fleet maintenance facilities, oil and gas service environments, and heavy commercial settings. Its dual plumbing configuration uses two swivel inlets and two low-profile outlet risers paired with an open drum slot, which promotes a non-crimping, flat, smooth hose wrap. The motor-driven rewind reduces operator fatigue in high-cycle operations where manual cranking is impractical.

Key Features

• 12-volt DC, 1/2 HP explosion-proof reversible electric motor for powered rewind in demanding environments
• Dual plumbing with two machined solid-brass 90-degree full-flow NPT swivels for simple seal maintenance without removing the reel from its mount
• Two low-profile outlet risers with open drum slot design deliver a non-crimping, flat, smooth hose wrap
• Heavy-duty CNC robotically spun and ribbed discs with rolled edges for strength, durability, and hose protection
• One-piece all-welded 12-gauge steel A-frame base for superior rigidity — mounting pattern built into the base for straightforward installation and removal
• CPC powder coat finish is chip-resistant and rust-inhibiting for long service life in corrosive or outdoor environments

Compatibility

Designed to accommodate hose with a 1/2 inch ID and 7/8 inch OD up to 200 feet in length. Intended for use in large-capacity dual-hose industrial and commercial reel applications where an electric-drive or hand-crank reel is required.

Installation Notes

Installation should be performed by a qualified technician familiar with industrial hose reel systems and low-voltage DC electrical wiring. Disconnect and lock out all power sources before making electrical connections to the motor. Secure the reel to a structurally adequate surface using the mounting pattern located in the steel base, and verify all NPT swivel connections are leak-free before returning the system to service. Consult applicable NEC guidelines when routing and connecting the 12-volt DC motor circuit.

Technical Specifications

• Hose Inner Diameter: 1/2 inch
• Hose Outer Diameter: 7/8 inch
• Hose Capacity: 200 feet
• Motor Voltage: 12 volts DC
• Motor Output: 1/2 HP
• Motor Type: Explosion-proof reversible electric
• Frame Material: 12-gauge welded steel
• Length: 41 inches
• Width: 21 inches
• Height: 21 inches
• Weight: 98 pounds
• Finish: CPC powder coat
• UPC: 674255823631

Standard Information

• Brand: COXREELS
• Manufacturer Part Number: 1275-4-200-ED