Coxreels 1275-4-150-EB Dual Hose Reel 150 Ft 1/2 Inch Id

Product Description

The COXREELS 1275-4-150-EB is a heavy-duty dual hose reel engineered for large-capacity fluid transfer applications in industrial, commercial, and contractor environments. It accepts hose with a 1/2-inch inner diameter and 7/8-inch outer diameter, with a 150-foot hose capacity. The reel is powered by a 24-volt DC, 1/3 HP reversible electric motor for motorized rewind and is also configurable for hand-crank operation. It features dual plumbing with two swivel inlets and two low-profile outlet risers. Licensed plumbers, irrigation contractors, and industrial maintenance technicians typically specify this reel for demanding fluid delivery setups requiring consistent, high-volume hose management.

The 1275-4-150-EB is suited for industrial and commercial service environments where large hose capacity and dual-circuit plumbing are required. Typical applications include industrial fluid dispensing, wash-down systems, and contractor service vehicles. The open drum slot and flat smooth hose wrap design reduce hose wear during repeated deployment and retrieval cycles. The reel works in fixed-mount configurations and is designed for permanent installation on walls, floors, ceilings, or vehicle service bodies.

Key Features

• Dual plumbing with two machined solid brass 90-degree full-flow NPT swivel inlets for simple seal maintenance without removing the reel from its mount
• Two exclusive low-profile outlet risers and open drum slot design provide a non-crimping, flat smooth hose wrap over the full 150-foot capacity
• One-piece all-CNC robotically welded 12-gauge steel A-frame base for superior rigidity — not bolted construction
• Heavy-duty CNC robotically spun and ribbed discs with rolled edges for strength, hose protection, and operator safety
• Permanently lubricated, self-aligning pillow block bearings for smooth rotation and long service life
• CPC powder coat finish provides chip resistance and rust inhibition for extended service in harsh environments
• 24-volt DC, 1/3 HP reversible electric motor for powered rewind

Compatibility

Designed for use with 1/2-inch ID, 7/8-inch OD hose up to 150 feet in length. Dual NPT swivel connections support standard threaded hose and fitting assemblies common in industrial fluid transfer and wash-down systems.

Installation Notes

Installation should be performed by a qualified technician familiar with fluid system plumbing and low-voltage electrical connections. Shut off all fluid supply pressure and disconnect or de-energize the 24-volt DC power source before mounting or servicing the reel. Verify that the mounting surface and fastener pattern can support the loaded weight of the reel and full hose capacity. Consult applicable local codes and manufacturer documentation for proper electrical wiring of the DC motor circuit.

Technical Specifications

• Hose Inner Diameter: 1/2 inch
• Hose Outer Diameter: 7/8 inch
• Hose Capacity: 150 feet
• Motor Voltage: 24 volts DC
• Motor Output: 1/3 HP
• Motor Type: Reversible electric
• Frame Material: 12-gauge steel, CNC robotically welded
• Swivel Material: Solid brass, machined
• Finish: CPC powder coat
• Length: 37 inches
• Width: 21 inches
• Height: 21 inches
• Weight: 68 pounds
• UPC: 674255838062

Standard Information

• Brand: COXREELS
• Manufacturer Part Number: 1275-4-150-EB