Coxreels 1125-5-250-EA Hose Reel 3/4 in Id 250 Ft

Product Description

The COXREELS 1125-5-250-EA is a heavy-duty industrial hose reel from the 1125 Series, designed for hand crank and motorized operation in demanding trade and industrial environments. Built around a one-piece all-welded 12-gauge steel A-frame base, this reel accepts 3/4 inch ID hose up to 250 feet in length. A low-profile outlet riser combined with an open drum slot design ensures a flat, non-crimping hose wrap that protects hose integrity over repeated use cycles. A machined solid brass 90-degree full-flow NPT swivel enables fast hose installation and seal maintenance without removing the reel from its mount. Licensed contractors, maintenance technicians, and industrial facilities personnel are the typical installers.

The 1125-5-250-EA is suited for stationary and vehicle-mounted industrial fluid transfer applications where reliable, high-cycle hose management is required. The motorized drive runs on 115 volts AC at 1/2 HP with a reversible AC rectified motor, making retrieval practical in high-volume service scenarios. The reel is configured for use with 3/4 inch ID hose at 250 feet, a common configuration in lubrication, water service, and general industrial fluid lines. The A-frame mounting pattern is built directly into the steel base for straightforward installation and detachment.

Key Features

• One-piece CNC robotically welded 12-gauge steel A-frame base for superior structural rigidity without bolted joints
• Machined solid brass 90-degree full-flow NPT swivel allows seal maintenance and hose installation without dismounting the reel
• CNC robotically spun and ribbed discs with rolled edges for hose protection and operator safety
• Low-profile outlet riser and open drum slot design delivers a flat, non-crimping hose wrap
• Permanently lubricated self-aligning pillow block bearings for smooth rotation and long service life
• CPC powder coat finish resists chips, rust, and corrosion for extended field life
• 115V AC, 1/2 HP reversible AC rectified motor included for powered retrieval

Compatibility

Designed for use with 3/4 inch ID hose up to 250 feet in length. Part of the COXREELS 1125 Series platform, which accommodates both hand crank and motorized configurations for industrial fluid transfer service.

Installation Notes

Installation is typically performed by qualified maintenance technicians or industrial contractors. Disconnect and lock out all electrical power and depressurize the hose and supply line fully before mounting or servicing the reel. Secure the A-frame base to a structurally adequate surface using the integrated mounting pattern; verify fastener ratings for the load and application. Electrical connections for the 115V AC motor must comply with applicable NEC requirements and be performed by a qualified electrician.

Technical Specifications

• Hose ID: 3/4 inch
• Hose Capacity: 250 feet
• Motor Voltage: 115 volts AC
• Motor Output: 1/2 HP reversible AC rectified
• Swivel Material: Solid brass, 90-degree full-flow NPT
• Frame Material: 12-gauge steel, CNC robotically welded
• Finish: CPC powder coat, chip resistant and rust inhibiting
• Length: 44 inches
• Width: 21.5 inches
• Height: 21.5 inches
• Weight: 85 pounds
• UPC: 674255822603

Standard Information

• Brand: COXREELS
• Manufacturer Part Number: 1125-5-250-EA