Cooper Wiring Devices OS106D1-W Occupancy Sensor Switch

Product Description

The COOPER WIRING DEVICES OS106D1-W is a passive infrared (PIR) occupancy sensor wall switch designed to automatically control lighting loads based on detected motion. It covers up to 1,000 square feet with a 180-degree detection pattern and replaces a standard single-pole wall switch in commercial and residential applications. The OS106D1-W operates at 120 VAC and supports incandescent loads up to 600 watts, fluorescent loads up to 600 watts, and is also rated for halogen and magnetic low-voltage fixtures. Manual delay adjustment lets technicians fine-tune the off-delay to match the space. The device ships in white finish and meets multiple listing and compliance standards including cULus and California Title 24.

This occupancy sensor switch is suited for offices, conference rooms, restrooms, storage areas, and similar spaces where hands-free lighting control reduces energy consumption. It mounts in a standard single-gang wall box and wires in place of a conventional switch, making it a straightforward retrofit or new-construction install. The 180-degree field of view is appropriate for corner-mount or end-of-wall placement where a full-room sweep is needed. Licensed electricians and facilities maintenance professionals are the primary installers in both light commercial and residential settings.

Key Features

• Passive infrared sensor with 180-degree detection pattern covering up to 1,000 square feet
• Compatible with incandescent, fluorescent, halogen, and magnetic low-voltage fixtures
• Manual off-delay adjustment for site-specific timing control
• Operates at 120 VAC; rated 600 watts for incandescent and 600 watts for fluorescent loads
• California Title 24 compliant and cULus listed to UL 244A and UL 1472
• White finish; fits standard single-gang wall box

Compatibility

Designed as an OEM-style replacement or new-installation occupancy sensor wall switch for standard single-gang boxes in 120 VAC residential and light commercial lighting circuits. Compatible with halogen fixtures, incandescent fixtures, and magnetic low-voltage loads as stated by the manufacturer.

Installation Notes

Installation must be performed by a qualified electrician in accordance with the National Electrical Code (NEC) and all applicable local codes. Turn off circuit power at the breaker panel and verify the circuit is de-energized with a non-contact voltage tester before removing the existing switch or making any wiring connections. The device requires a neutral conductor at the switch location; confirm neutral availability before specifying this sensor for retrofit work. Do not use with electronic low-voltage, LED drivers, or motor loads unless confirmed compatible by the manufacturer.