Cooper Lighting HLBSL4069FS35-4PK Led Retrofit Kit 4PK

Product Description

The COOPER LIGHTING HLBSL4069FS35-4PK is a 4-inch round LED direct mount retrofit kit sold in a value 4-pack. It installs directly into drywall ranging from 0.5 inches to 1.25 inches thick using attached spring clips, requiring no separate housing or can fixture. Each fixture delivers up to 800 lumens with a selectable color temperature of 3000K, 4000K, or 5000K, and a 90 CRI rating for accurate color rendering. The unit is dimmable to 10 percent using standard 120-volt dimmers and carries an Energy Star rating. Rated for 35,000 hours of service life, this kit is suited for electricians performing recessed lighting retrofits in residential and light commercial ceilings.

This kit is designed for direct installation into drywall ceilings in residential and light commercial applications. It is listed for damp and wet locations, including use in showers and protected ceiling areas. The fixture is approved for contact with insulation, though it is not recommended for use with spray foam insulation. The included remote junction box simplifies wiring during installation. The selectable color temperature makes it adaptable across different rooms and design requirements without stocking multiple SKUs.

Key Features

• Delivers up to 800 lumens per fixture with 90 CRI for accurate color rendering
• Selectable color temperature: 3000K, 4000K, and 5000K
• Dimmable to 10 percent with standard 120-volt dimmers
• Installs directly into drywall from 0.5 inches to 1.25 inches thick using spring clips
• Damp and wet location listed, including showers and protected ceilings
• Energy Star rated with a 5-year warranty and 35,000-hour rated lifespan
• Includes remote junction box; approved for insulation contact (not spray foam)

Compatibility

Designed for direct-mount recessed retrofit installations in drywall ceilings without an existing can or housing. Compatible with standard 120-volt dimmer switches capable of dimming LED loads to 10 percent.

Installation Notes

Installation should be performed by a licensed electrician in accordance with NEC requirements and local electrical codes. Shut off circuit power at the breaker before beginning any wiring work. The spring-clip mounting system eliminates the need for a separate recessed housing, but the drywall thickness must fall within the 0.5-inch to 1.25-inch range for secure mounting. Do not install in ceilings where spray foam insulation is present.