Cooper Lighting ESF1A4MW Led Motion Security Floodlight

Product Description

The COOPER LIGHTING ESF1A4MW is a twin head LED motion-activated outdoor security floodlight designed for residential and light commercial exterior installations. It delivers 1420 lumens at a 4000K color temperature through integrated LEDs rated for 50,000 hours of maintenance-free operation. The fixture features a 180-degree passive infrared detection zone with a range of up to 50 feet, adjustable sensitivity, and a duration timer adjustable from 1 to 12 minutes. The rust-free polycarbonate housing carries a white finish and is rated for both damp and wet locations. Licensed electricians typically handle installation on new construction or retrofit projects.

This floodlight is suited for residential outdoor areas including walkways, yards, patios, play areas, and driveways where reliable motion-triggered illumination is needed. The fixture mounts to a wall or eave over a recessed junction box, making it compatible with standard exterior electrical rough-in. The fully gasketed diffused lens seals out moisture, dirt, insects, and other contaminants, keeping the optics clean in exposed outdoor environments. Its 120-volt operation fits standard residential branch circuits without any transformer or driver accessory.

Key Features

• 1420-lumen output at 4000K neutral white color temperature
• 180-degree PIR motion detection with up to 50-foot range
• Adjustable sensitivity and timer duration from 1 to 12 minutes
• Integrated LEDs rated for 50,000 hours of maintenance-free service
• Rust-free polycarbonate housing with fully gasketed diffused lens
• Rated for damp and wet locations; suitable for fully exposed exterior mounting

Compatibility

Designed for wall or eave mounting over standard recessed junction boxes in residential and light commercial exterior applications rated for 120-volt branch circuits.

Installation Notes

Installation should be performed by a licensed electrician in accordance with NEC requirements and applicable local codes. Shut off power at the circuit breaker before wiring and confirm the box is dead with a voltage tester before making connections. The fixture is intended for junction box mounting only and should not be surface-mounted to framing without a listed box. Verify the junction box is rated for the fixture weight before mounting.