Cooper Crouse-hinds TP7815 Hazardous Location Light Fixture

Product Description

The COOPER CROUSE-HINDS TP7815 is an incandescent hazardous location light fixture rated for 200 watts at 120 volts. It features an aluminum housing with a glass lens and is built to resist corrosion, heat, and vapor ingress. The vaporproof construction makes it suitable for demanding environments where moisture, chemical exposure, or combustible atmospheres are present. At 3.375 inches wide and 9 inches high, it is a compact pendant-mount unit. Electricians and industrial maintenance technicians install this fixture in classified locations as defined by NEC Article 500. The housing ships at approximately 2.58 pounds.

This fixture is intended for use in hazardous and wet location applications, both indoors and outdoors. Typical install scenarios include petrochemical facilities, wastewater treatment plants, food processing areas, marine environments, and other industrial or commercial spaces where vaporproof lighting is required. Pendant mounting allows the fixture to hang from conduit drops in areas where overhead clearance and airflow around hot lamp surfaces are a consideration. The clear housing finish allows visual inspection of the lamp without removing the globe.

Key Features

• Vaporproof construction rated for wet locations, indoor and outdoor use
• Corrosion-resistant and heat-resistant aluminum housing
• Glass lens for durability in harsh environments
• Pendant mount design for conduit-drop installation
• 200-watt incandescent lamp type at 120 volts
• UL Listed for hazardous location compliance

Compatibility

Designed as an OEM-style hazardous location pendant fixture for incandescent lamp installations in NEC-classified environments requiring vaporproof, corrosion-resistant lighting.

Installation Notes

Installation must be performed by a licensed electrician familiar with NEC Article 500 hazardous location requirements. De-energize the circuit at the breaker and verify zero voltage with a meter before wiring. Conduit seals may be required at the fixture entry point depending on the location classification. Confirm the lamp wattage does not exceed the 200-watt fixture rating before energizing.