Cooper Bussmann BP/TL-15 Type Tl Plug Fuse 15A 3 Pack

Product Description

The COOPER BUSSMANN BP/TL-15 is a 15-amp Type TL time-delay plug fuse designed for residential electrical panels and load centers. The time-delay characteristic allows brief motor start-up inrush currents to pass without nuisance tripping while still protecting against sustained overloads and short circuits. Each carded retail pack contains 3 fuses. At 1.83 inches long, 0.917 inches wide, and 0.417 inches high, this fuse fits standard Edison-base plug fuse sockets. Licensed electricians and qualified electrical contractors are the typical installers for panel-level fuse replacements.

Type TL plug fuses are used in residential service panels, sub-panels, and fused disconnect boxes where Edison-base fusing is required. The time-delay design makes this fuse well suited for circuits serving motors, refrigeration compressors, and other loads that draw higher inrush current at startup. The 3-pack carded format is practical for service technicians who routinely stock common amperage ratings on the truck.

Key Features

• 15-amp rating with time-delay action for motor and compressor circuit protection
• Type TL designation — tamper-resistant Edison-base design helps prevent over-fusing
• 3 fuses per carded pack for convenient field stocking
• Compact dimensions: 1.83 inches x 0.917 inches x 0.417 inches
• Suitable for residential service panels, sub-panels, and fused disconnects

Compatibility

Designed as a direct replacement for standard 15-amp Type TL Edison-base plug fuse sockets in residential electrical panels and fused disconnect enclosures.

Installation Notes

Installation and replacement of plug fuses in service panels must be performed by a licensed electrician in accordance with NEC requirements. Always shut off the main breaker or disconnect power to the panel before removing or installing fuses. Never replace a fuse with a higher amperage rating than the circuit is wired for. Verify the socket type accepts a Type TL fuse before installation to maintain proper over-fusing protection.