Cooper Bussmann BAF-1-1/2 Cartridge Fast-acting Fuse 1.5A

Product Description

The COOPER BUSSMANN BAF-1-1/2 is a general-purpose cartridge fast-acting fuse rated at 1.5 amps and 250 volts. It features a fiber body with a 10.3 mm diameter and an overall length of 38.10 mm (1-1/2 inches). Designed for overcurrent protection in low-current circuits, it responds quickly to fault conditions to protect downstream components. The fast-acting timing characteristic makes it suitable for circuits without high inrush loads. It installs into a standard fuse holder and is appropriate for use in electrical control panels, instrumentation, and light-duty power circuits serviced by licensed electricians and qualified technicians.

This fuse is intended for general-purpose overcurrent protection in residential, commercial, and light industrial electrical applications. Its compact cartridge form factor fits standard fuse holders commonly found in control boards, metering equipment, and secondary circuit protection assemblies. The 250-volt rating covers a wide range of single-phase low-voltage circuit applications. With a 1.5-amp rating, it is well suited for protecting sensitive control wiring and instrumentation circuits where precise overcurrent response is required.

Key Features

• Fast-acting fuse timing for immediate response to overcurrent faults
• 1.5-amp rating suitable for low-current control and instrumentation circuits
• 250-volt maximum voltage rating for broad single-phase circuit compatibility
• Fiber body construction at 10.3 mm diameter and 38.10 mm overall length
• Mounts in standard cartridge fuse holders
• CE Certified and CSA Class 1422-01 File 53787 Certified

Compatibility

Designed for use with standard cartridge fuse holders that accept a 10.3 mm diameter, 38.10 mm (1-1/2 inch) body fuse in general-purpose overcurrent protection applications.

Installation Notes

Installation should be performed by a licensed electrician or qualified technician in accordance with the National Electrical Code (NEC) and applicable local codes. Always de-energize and lock out the circuit before replacing a fuse. Confirm the replacement fuse matches the amperage, voltage, and physical dimensions required by the application. Do not substitute a higher-amperage fuse in place of the specified rating.