Control Devices BVM75P75-0AA 3/4 in Ball Valve Brass

Product Description

The CONTROL DEVICES BVM75P75-0AA is a 3/4-inch full-port, 2-way manual ball valve designed for in-line shutoff and flow control in plumbing, HVAC, and mechanical systems. The brass body handles up to 600 psi working pressure, making it suitable for a wide range of commercial and residential service applications. A lever handle provides quick quarter-turn operation for fast isolation during service or emergencies. PTFE seals deliver reliable shutoff and resist chemical degradation common in water and compressed-air lines. This valve is lead-free and meets CSA and UPC standards.

This ball valve is suited for residential and light commercial plumbing, hydronic heating systems, and HVAC water-side piping. The male NPT by female NPT end connections allow straightforward inline installation with standard threaded pipe. Plumbers, pipefitters, and HVAC technicians typically install this valve as a service isolation point on supply or return lines, equipment connections, and branch takeoffs. Its full-port design minimizes pressure drop across the valve, which is critical in systems with tight flow requirements.

Key Features

• Full-port ball design minimizes flow restriction and pressure drop
• Brass body rated to 600 psi maximum working pressure
• PTFE seats and seals provide durable, leak-resistant shutoff
• Quarter-turn lever handle allows rapid open/close operation
• MNPT x FNPT end connections for inline threaded pipe installation
• Lead-free construction meets CSA and UPC standards

Compatibility

Designed as an OEM-style replacement or new-installation ball valve for 3/4-inch NPT threaded piping systems in plumbing, HVAC hydronic, and general mechanical applications.

Installation Notes

Installation should be performed by a licensed plumber or qualified mechanical contractor in accordance with local plumbing codes and IPC requirements. Shut off the water supply and relieve system pressure before removing or installing any valve. Apply thread sealant or pipe tape to the male threads before assembly and tighten to manufacturer pipe-fitting standards without over-torquing the brass body. Confirm the valve is in the fully open or fully closed position before restoring system pressure and check for leaks at all connections.