Continental Contitech VRK05030-50-11 Air Hose 1/2 in 50 Ft

Product Description

The CONTINENTAL CONTITECH VRK05030-50-11 is a rubber oil-resistant air hose designed for compressed air service in demanding shop and field environments. Built with a 1/2 inch inside diameter and rated to 300 psi working pressure, it handles the output of most industrial and contractor-grade air compressors without issue. The hose spans 50 feet, giving technicians enough reach for most vehicle bays, mechanical rooms, and job-site setups. Its operating temperature range runs from -20 degrees F to 190 degrees F, making it suitable for both cold-weather outdoor use and hot shop floors. MNPT x MNPT end connections on both ends allow direct thread engagement with standard air fittings and quick-connect bodies. Licensed HVAC techs, plumbers, and general contractors routinely specify this hose length and diameter for day-to-day pneumatic tool use.

This hose suits a wide range of light industrial and trade applications. The 50-foot length covers typical bay-to-bay or compressor-to-workstation runs without the need for extension hoses in most single-bay shops. The oil-resistant rubber construction holds up in environments where compressor oil carryover, floor lubricants, or hydraulic fluid contact is routine. Both MNPT fittings thread directly into standard ball valves, manifolds, and air tool inlets without adapters. It is appropriate for residential service vans, commercial mechanical rooms, and fixed compressor installations.

Key Features

• 300 psi working pressure rating handles most industrial compressor outputs
• Oil-resistant rubber construction resists degradation from lubricant exposure
• 50-foot length provides extended reach without hose couplers
• 1/2 inch inside diameter minimizes pressure drop across tool-demand cycles
• MNPT x MNPT end connections fit standard air line hardware without adapters
• Wide service temperature range of -20 degrees F to 190 degrees F suits outdoor and high-heat shop use

Compatibility

Designed as a standard-thread replacement or new-installation air hose for compressed air systems using 1/2 inch MNPT fittings and operating within the stated pressure and temperature limits.

Installation Notes

A licensed technician or qualified trades person should depressurize the air line completely before disconnecting or installing this hose. Apply thread sealant tape to all MNPT connections and tighten to hand-tight plus the appropriate number of turns per fitting manufacturer guidance — do not over-torque threaded fittings. After installation, pressurize slowly and inspect all connections for leaks before placing the hose in service. Keep the hose away from sharp edges, pinch points, and heat sources that exceed its rated temperature limit.