Continental Contitech PLR03830-50-13 Air Hose 3/8 in

Product Description

The CONTINENTAL CONTITECH PLR03830-50-13 is a multipurpose PVC air hose designed for general-purpose pneumatic applications in trade and industrial settings. Built with a 3/8-inch inside diameter and rated at 300 psi working pressure, this 50-foot hose delivers the flow capacity and pressure handling needed for air tools, compressors, and service equipment. The temperature range of -10 degrees F to 158 degrees F makes it suitable for both cold-weather outdoor work and warm shop environments. MNPT x MNPT fittings at 1/4 inch are included on both ends for direct connection to standard pneumatic fittings and couplers. Licensed plumbers, HVAC techs, and general contractors rely on this type of hose for everyday compressed-air service tasks.

This hose is suited for residential and light commercial jobsite use wherever a reliable, flexible air supply line is needed. Common applications include powering pneumatic nailers, impact wrenches, blow guns, and other air tools fed from a portable or stationary compressor. The 50-foot length provides working range without requiring additional extensions in most single-trade scenarios. The red PVC construction resists abrasion and remains flexible enough to coil and store between jobs.

Key Features

• 300 psi working pressure rating for compatibility with standard shop and portable compressors
• 3/8-inch inside diameter provides adequate flow for a wide range of pneumatic tools
• 50-foot length reduces the need for extension hoses on most jobsites
• PVC construction offers flexibility and abrasion resistance across a broad temperature range
• MNPT x MNPT 1/4-inch end connections fit standard pneumatic couplers and fittings
• Rated from -10 degrees F to 158 degrees F for use in varied environmental conditions

Compatibility

Designed as a general-purpose replacement or supplemental air hose for use with standard compressed-air systems using 1/4-inch MNPT pneumatic fittings and couplers.

Installation Notes

Depressurize the air supply and disconnect from the compressor before attaching or removing the hose. Hand-tighten MNPT fittings and apply thread sealant tape as appropriate per manufacturer and jobsite standards. Inspect the hose for kinks, cuts, or abrasion before each use and do not exceed the rated 300 psi working pressure. Coil and store the hose away from direct heat sources or sharp edges to extend service life.