Continental Contitech PLB03830-20-13 Air Hose 3/8in 20ft

Product Description

The CONTINENTAL CONTITECH PLB03830-20-13 is a multipurpose compressed air hose designed for general-purpose pneumatic service across a wide range of trade and industrial applications. Built from PVC, this hose measures 3/8 inch inside diameter and runs 20 feet in length, rated for a working pressure of 300 psi. It connects on both ends via 1/4 inch MNPT fittings. The temperature range of -10 to 158 degrees F makes it serviceable in most indoor shop environments and moderate outdoor conditions. HVAC technicians, plumbers, electricians, and general contractors use this type of hose for air tools, blow guns, and pneumatic equipment at the job site or in the shop.

This hose is suited for light to medium-duty compressed air service in residential and commercial settings. Typical applications include powering impact wrenches, ratchets, nailers, and other air tools from a portable or stationary compressor. The 20-foot length provides adequate reach for most bench and bay work without excessive coiling. The blue PVC construction keeps weight low and makes the hose easy to manage and store. The 1/4 inch MNPT fittings on each end are a standard size compatible with common quick-connect couplers and tool fittings used across the trades.

Key Features

• 3/8 inch inside diameter for adequate airflow to most common air tools
• 300 psi working pressure rated for typical shop and job-site compressor output
• 20-foot length suits bench work and short-run pneumatic tool use
• PVC construction keeps weight low at 3 pounds for easy handling and transport
• 1/4 inch MNPT fittings on both ends match standard quick-connect couplers
• Operating range of -10 to 158 degrees F covers most indoor and moderate outdoor environments

Compatibility

Designed as a general-purpose replacement air hose for use with standard 1/4 inch MNPT pneumatic fittings and quick-connect systems common to portable and stationary compressors in trade and shop environments.

Installation Notes

Installation of compressed air hoses should be performed by a qualified technician familiar with pneumatic system safety. Depressurize the air supply and verify the compressor is off before connecting or disconnecting the hose. Inspect fittings and threads before assembly and ensure MNPT connections are properly sealed with thread sealant tape rated for compressed air service. Do not exceed the rated working pressure of 300 psi.