Continental Contitech GOR03850-25-11 Air Hose 3/8 in 25 Ft

Product Description

The CONTINENTAL CONTITECH GOR03850-25-11 is an oil-resistant air hose designed for compressed air delivery in demanding shop, plant, and field service environments. Built with a Buna-N (nitrile rubber) tube, it resists petroleum-based oils and lubricants that would degrade standard rubber hoses. The hose measures 3/8 inch inside diameter and runs 25 feet in length, with a working pressure rating of 500 psi. The temperature range spans -20 degrees F to 190 degrees F, making it suitable for both cold-weather outdoor use and hot shop conditions. Licensed HVAC technicians, plumbers, mechanics, and general contractors rely on this type of hose for air tool supply lines and compressor drop connections.

This hose is suited for industrial and commercial shops, service trucks, and job-site compressor setups where oil contamination is a routine concern. The 3/8 inch ID supports adequate airflow for most pneumatic hand tools and blow guns. The MNPT x MNPT end fittings allow direct connection to standard air fittings and couplers without adapters in most setups. The yellow jacket provides high visibility on busy shop floors and job sites. It is packaged as a single 25-foot assembled hose ready for deployment.

Key Features

• Buna-N (nitrile rubber) tube construction resists petroleum oils and lubricants
• 500 psi working pressure rating for heavy-duty compressed air service
• Operating range of -20 degrees F to 190 degrees F for year-round use
• 3/8 inch ID x 25 feet assembled length with MNPT x MNPT end fittings
• Yellow outer jacket for visibility on job sites and shop floors
• 0.73 inch outside diameter keeps the hose manageable and easy to route

Compatibility

Designed as a direct-connect replacement or new-installation air hose for compressed air systems using standard 3/8 inch MNPT fittings and couplers in shop, industrial, and field service applications.

Installation Notes

Installation is typically performed by mechanics, HVAC technicians, or general tradespeople familiar with compressed air systems. Always depressurize and bleed the air supply line before disconnecting or replacing any hose assembly. Inspect MNPT threads and apply appropriate thread sealant tape per the fitting manufacturer recommendation before making connections. Do not exceed the rated working pressure of 500 psi.